Looking for 25' Bertrams

[Pete Fallon]

Faithful,

[spencer]

What condition?

[Pete Fallon]

Spencer,
I have no idea I'll try and find out from Randy, I don't know if they are sedans, FBC or Bahia Mars
Pete Fallon

[Pete Fallon]

Faithful,
I put up a post earlier about a fellow from Bermuda that contacted DuRite Boats in Stuart about shipping 2 25's to Stuart in containers. I don't have any info at this time Randy at DuRite talked to him and then Randy called me to see if there was any interest around this area for 25's that needed to be redone. I'll find out more in the next few days. I don't know what happened to the rest of the post that I put up earlier tonight.
Pete Fallon

[Todd Pearce]

Pete , can you get a 25 in a shipping container? I thought they would be to wide, I`d love to know if it can be done
Regards Todd

[Bertramp]

http://www.ebay.com/itm/1963-Bertram-25 ... 267wt_1360

[CamB25]

oh my, that is a flash back to my 25 on the day I became her new owner. Scary....




No way a B25 will fit into a conex box in one piece. Containers are deigned for truck and rail transport. Inside width is around 8'6"

[mike ohlstein]

It'll fit on its side.....

[Rocket]

A low cube sea can has a door opening of 92" w and 88" high. A High Cube container has a door opening 101" tall inside. You could put one on a pallett, but I think it would be a big challenge to put a 25 in a can without destroying the boat.

[Navatech]

There are many types of containers. It's quite possible a 40' "flat" (only has the floor and the front&rear uprights) can take a 25 with nothing hanging over the side...