new outboard needed
Moderators: CaptPatrick, mike ohlstein, Bruce
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
new outboard needed
Bad weekend,
We blew up my wife's motor on her 23' bay boat. I'm looking for a new 175hp to 225 or 250hp to get me out of the dog house. I like the Yamaha SHO's 4 strokes and the E tecs, but are open to others. I found http://www.boats.net" onclick="window.open(this.href);return false;, and, were looking at there stuff. Any other leads would be greatly appreciated.
Weight is a big consideration...I don't know anything about the new Yamaha HPDI's, such as reliability on their smaller motors.
Thanks.
John.
We blew up my wife's motor on her 23' bay boat. I'm looking for a new 175hp to 225 or 250hp to get me out of the dog house. I like the Yamaha SHO's 4 strokes and the E tecs, but are open to others. I found http://www.boats.net" onclick="window.open(this.href);return false;, and, were looking at there stuff. Any other leads would be greatly appreciated.
Weight is a big consideration...I don't know anything about the new Yamaha HPDI's, such as reliability on their smaller motors.
Thanks.
John.
I'll never ruin a $50 buzz with a $4 sandwich
Re: new outboard needed
John - what engine did you blow up?
1963 Bertram 25
1973 Boston Whaler 13 - sold!
1998 Scout 172 SF - beach taxi
1973 Boston Whaler 13 - sold!
1998 Scout 172 SF - beach taxi
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
Re: new outboard needed
camb25,
It was a 2001 Yamaha ox66 150 hp with a trp lower unit...twin rotating prop. The lower unit is very disirable down here in Tx for the shallow running boats.
John.
It was a 2001 Yamaha ox66 150 hp with a trp lower unit...twin rotating prop. The lower unit is very disirable down here in Tx for the shallow running boats.
John.
I'll never ruin a $50 buzz with a $4 sandwich
Re: new outboard needed
interesting...I've never seen a trb. Is the advantage smaller prop diameters? I see quite a few boats with jackshafts in North Carolina for negotiating the shallows.
1963 Bertram 25
1973 Boston Whaler 13 - sold!
1998 Scout 172 SF - beach taxi
1973 Boston Whaler 13 - sold!
1998 Scout 172 SF - beach taxi
Re: new outboard needed
John we are Yamaha dealers in San Antonio, call me at 210 275-5415. We might be able to help you out. Les Brown
Re: new outboard needed
I have a 150 Etec and have had injector issues twice in three years. Probably had only 150 hrs. when first issue arose. The fix is not cheap. If I had to do it over again I would have bought the Yamaha 4 stroke. I made my decision based on weight and price.
BRUISER
BERG1552M76F-315
Bradley Tiller
BERG1552M76F-315
Bradley Tiller
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
Re: new outboard needed
canb25
The lower unit has a 18" shaft with a low water pickup...you can run the motor with 3/4 of the props out of the water...you can get up in less than 5"'s of water.
Les,'I'm going to San Diego today for a week, but, will give you a buzz asap.
Thanks guys.
John.
The lower unit has a 18" shaft with a low water pickup...you can run the motor with 3/4 of the props out of the water...you can get up in less than 5"'s of water.
Les,'I'm going to San Diego today for a week, but, will give you a buzz asap.
Thanks guys.
John.
I'll never ruin a $50 buzz with a $4 sandwich
-
- Senior Member
- Posts: 281
- Joined: Jul 20th, '06, 10:30
- Location: S. Georgian Bay, Canada
- Contact:
Re: new outboard needed
I've spent some time on a 23' bay boat w/a 250 hpdi Yammie on the back and am very impressed.
Great fuel economy, quiet, hardly uses any oil.
My understanding is that the 4 strokes are heavier(?), with more moving parts to break.
Know some people that are completely satifsfied with their ETEC's and Zuk's
Regardless, alweays keep in mind service after the sale cause they all build on Mondays and Fridays.
Good luck
Great fuel economy, quiet, hardly uses any oil.
My understanding is that the 4 strokes are heavier(?), with more moving parts to break.
Know some people that are completely satifsfied with their ETEC's and Zuk's
Regardless, alweays keep in mind service after the sale cause they all build on Mondays and Fridays.
Good luck
1971 31' Bahia Mar hull# 316-1035
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
Re: new outboard needed
I went with a 175hp suzuki 4 stroke...479 lbs, compared to my old motor which is 5 lbs lighter...6 year warranty. A special thanks to Les, Tim and his wife Barbara. I appreciate ya'll putting in the time. Your welcome to come down and check out Reel Cowboy anytime.
Thanks.
John.
Thanks.
John.
I'll never ruin a $50 buzz with a $4 sandwich
Who is online
Users browsing this forum: Bing [Bot] and 84 guests