Replacement intake screen source??????
Moderators: CaptPatrick, mike ohlstein, Bruce
Replacement intake screen source??????
Hi all,
I installed external strainers when I repowered a few years ago, and they have worked great. I removed the screens to clean them this spring, and they disintegrated. They are bronze. Apparently there has been a run on these damned things, because Hamilton and Jamestown are both back ordered. I had ordered from Jamestown and they won't be in until the 19th at this point. This is clearly keeping me from splashing Alchemy.
Anyone have access to a set of replacement screens they can lay hands on? No mail order houses, as they may all be in the same spot. But actually physically accessing them would be awesome!!!!
they are the 3.5 by 7.2 inch give or take screens.
Many thanks....
Dug
I installed external strainers when I repowered a few years ago, and they have worked great. I removed the screens to clean them this spring, and they disintegrated. They are bronze. Apparently there has been a run on these damned things, because Hamilton and Jamestown are both back ordered. I had ordered from Jamestown and they won't be in until the 19th at this point. This is clearly keeping me from splashing Alchemy.
Anyone have access to a set of replacement screens they can lay hands on? No mail order houses, as they may all be in the same spot. But actually physically accessing them would be awesome!!!!
they are the 3.5 by 7.2 inch give or take screens.
Many thanks....
Dug
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
Re: Replacement intake screen source??????
Dug,
See if you can match up, or modify, the screen size to the Groco brand external strainers, they're stainless steel...
See if you can match up, or modify, the screen size to the Groco brand external strainers, they're stainless steel...
Br,
Patrick
Molon labe
Patrick
Molon labe
Re: Replacement intake screen source??????
Might just buy stainless screen from McMaster Carr and cut it to the right size...
Good call Pat.
Thanks,
Dug
Good call Pat.
Thanks,
Dug
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
Re: Replacement intake screen source??????
Be sure that your bonding is good, not only to your through hull fittings, but also to the external strainers. At least one of the screw holes in the strainer should have a through bolt to be connected with the bonding wire... Possibly why your bronze screens disintegrated.
Br,
Patrick
Molon labe
Patrick
Molon labe
Re: Replacement intake screen source??????
Pat, I think they disintegrated more because of the screw driver I used to push them out. :)
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
Re: Replacement intake screen source??????
Sounds like you have the old Sendure style strainers that the screen slides into a slotted track on both sides and has 2 screws at the aft end. If so, use a liberal amount of Tefgel in the slots and on the screen edges. Future problem solved...
Br,
Patrick
Molon labe
Patrick
Molon labe
Re: Replacement intake screen source??????
Dug,
I went through the same thing this spring. It turned out that mine were made by Buck Algonquin which, oddly enough is local, but I had to order as they don't do retail. I think I ordered from an outfit in Miami. Shipping was super fast and I believe the parts were actually shipped by Buck....
You can check dimensions here:
http://catalog.buckalgonquin.com/viewit ... ut-screens" onclick="window.open(this.href);return false;?
JD
I went through the same thing this spring. It turned out that mine were made by Buck Algonquin which, oddly enough is local, but I had to order as they don't do retail. I think I ordered from an outfit in Miami. Shipping was super fast and I believe the parts were actually shipped by Buck....
You can check dimensions here:
http://catalog.buckalgonquin.com/viewit ... ut-screens" onclick="window.open(this.href);return false;?
JD
Re: Replacement intake screen source??????
why not switch out to south bay, ?
just a thought, no screens to deal with
just a thought, no screens to deal with
1968 hull # 316 - 757
Who is online
Users browsing this forum: Google [Bot], Tony Meola and 55 guests