Old Question

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
Bill Mckinnon
Senior Member
Posts: 117
Joined: Jun 29th, '06, 13:17
Location: Charleston SC

Old Question

Post by Bill Mckinnon »

I searched the site but couldn't find where someone said there was a place in Florida that repaired the Hynautic Steering helms or you can gets parts from then. Need to rebuild mine is leaking from the helm station. If anyone knows or can find the past post any help would be great

thanks
Bill McKinnon
Clarleston SC
ljmauricio
Junior Member
Posts: 110
Joined: Oct 5th, '12, 07:02

Re: Old Question

Post by ljmauricio »

Southern Charm http://boaterstore.com/service.html" onclick="window.open(this.href);return false;
Captain Crispy
Posts: 4
Joined: Jan 31st, '07, 19:28
Location: Glen Allen, VA

Re: Old Question

Post by Captain Crispy »

Bill Mckinnon wrote:I searched the site but couldn't find where someone said there was a place in Florida that repaired the Hynautic Steering helms or you can gets parts from then. Need to rebuild mine is leaking from the helm station. If anyone knows or can find the past post any help would be great

thanks
Bill McKinnon
Clarleston SC

Very easy to do yourself. Just did mine 2 weeks ago, It took about 2 hours including bleeding the system of air when I was done. New seal kit is about $33 from Jamestown Distributors and others, plus you will need a quart of fluid for about $21. Some good pictures of the procedure with step-by-step instructions can be found here:

http://www.local1259iaff.org/hydraulichelmrebuild.html" onclick="window.open(this.href);return false;
Post Reply

Who is online

Users browsing this forum: No registered users and 146 guests