Smart Start

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
ZeroCavity
Senior Member
Posts: 204
Joined: Jul 10th, '06, 14:36
Location: Naples, FL

Smart Start

Post by ZeroCavity »

1965/2007 Bertram 31
User avatar
Bruce
Site Admin
Posts: 3789
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

I believe the cost for that unit is around 350 bucks.

Soft starters have been used for a while in the commercial and residential HVAC and run about 200 bucks.

Hard start kits usualy will do the same thing for 50 bucks.

The soft starter just starts the compressor more slowly reducing current needs where as the hard start kit uses large capacitors which store energy and its expelled on startup reducing the spike in start current.

If someone is really on the hairy edge of current consumption, then the soft starter would probably do a little better.

In theory they should make the compressor last longer, less current, less stress.
User avatar
conchy joe
Posts: 153
Joined: Jan 15th, '11, 03:06

Post by conchy joe »

I just went through the same dilemma. I settled on a hard start kit from my local HVAC wholesaler. It was less than $9.00 and cured my problem.
Troy & Daria

28 Bertram FBC, 3.9 Cummin BT's

Conchy Joe "ITS THE BOAT'S NAME, NOT MINE" -
Hypoluxo Point, FL
Post Reply

Who is online

Users browsing this forum: No registered users and 159 guests