Knots

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
Brewster Minton
Senior Member
Posts: 1795
Joined: Jun 30th, '06, 07:44
Location: Hampton Bays NY
Contact:

Knots

Post by Brewster Minton »

Until the mid-19th century vessel speed at sea was measured using a chip log. This consisted of a wooden panel, weighted on one edge to float upright, and thus present substantial resistance to moving with respect to the water around it, attached by line to a reel. The chip log was "cast" over the stern of the moving vessel and the line allowed to pay out. Knots placed at a distance of 47 feet 3 inches (14.4018 m) passed through a sailor's fingers, while another sailor used a 30 second sand-glass (28 second sand-glass is the current accepted timing) to time the operation.[6] The knot count would be reported and used in the sailing master's dead reckoning and navigation. This method gives a value for the knot of 20.25 in/s, or 1.85166 km/h. The difference from the modern definition is less than 0.02%.
SteveM
Senior Member
Posts: 660
Joined: Jul 3rd, '06, 22:14
Location: Man-O-War Cay, Bahamas

Post by SteveM »

thanks, great bit of history
Steve Marinak
Duchess - 1973 Sportfisherman
User avatar
scot
Senior Member
Posts: 1470
Joined: Oct 3rd, '06, 09:47
Location: Hurricane Alley, Texas
Contact:

Post by scot »

It is always amazing to learn just how accurate some of the old methods/units of measure were, nice.

They didn't need no stinkin GPS.
Scot
1969 Bertram 25 "Roly Poly"
she'll float one of these days.. no really it will :-0
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 23 guests