Bow pulpit...

CMP · Post by **CMP** » Feb 22nd, '10, 12:19

I can't seem to find the thread someone put up here that detailed the building of a real nice bow pulpit into a 25 (I think)-might have been a 31, but no matter as the technique I want to use on the 25 would be pretty much the same. We use the anchor way too much down here not to have a good pulpit/windlass set-up. Thanks...

CMP

tunawish · Post by **tunawish** » Feb 22nd, '10, 13:07

Mark,

There is a 25 for sale in the NY / NJ area that had what I thought was decent design for a pulpit.. It was fabricated from Aluminum..interior support pic also..A bit overbuilt but done well.. I believe it was a black or dark blue hull...

If I can find the link I'll post it...

Ray

tunawish · Post by **tunawish** » Feb 22nd, '10, 13:10

Mark here it is.....

http://www.yachtworld.com/core/listing/ ... id=2048093

If this link doesn't work it's the first one up on a yachtworld search for the bert 25 ..
It's in brick NJ....

Ray

CMP · Post by **CMP** » Feb 22nd, '10, 13:47

Thanks Ray, that's nice but a bit more involved than I want. I saw a real nice one here, just cannot find it...

CMP

mike ohlstein · Post by **mike ohlstein** » Feb 22nd, '10, 14:00

randall · Post by **randall** » Feb 22nd, '10, 17:02

mark....i've been daydreaming about one if for no other reason it would keep the bow of the boat between the pilings when i go out alone on windy days...which is almost always. my idea was to run two mahogany boards parallel to the outside of the hatch (like an extension of the sides so they taper) and out a ways past the bow. then fill it in like the swim platform. of course the boards would be scribed in so they followed the contours.

CMP · Post by **CMP** » Feb 22nd, '10, 17:25

Randall, I was considering something similar but not so elaborate if I couldn't find the thread. Butler makes some real nice ones ready to go but I bet they are big bucks, so I was thinkin about pirating the concept and making it my own in either teak or glass. Mike, that old boat looks like my old Young Brothers stick boat, well not really, but the idea is the same...

mike ohlstein · Post by **mike ohlstein** » Feb 22nd, '10, 17:39

They made some damn nice boats.....

John F. · Post by **John F.** » Feb 22nd, '10, 17:59

Mark-

I did this pulpit as one of my first B31 projects. It replaced a diamond plate steel pulpit that was on there. Its basically solid with the sides made of mahogany and I scribed and cut them to fit the contour of the boat. The Butler puplit was nice (and expensive), but it wouldn't fit the contour up front. I got that windlass because my friend's low profile kept screwing up, but I'd get a low-profile if I were doing it again just for looks. The thickness and width of the puplit were set by what it replaced--had to be similar to get the bow rail and marks on the deck to line up--get covered up. May be a little clunky, but it works and its solid--you can stand on the end of it.

John

randall · Post by **randall** » Feb 22nd, '10, 19:30

well there you go!!

AndreF · Post by **AndreF** » Feb 22nd, '10, 20:49

Nice work, John, your place looks comfortable.
Cool shot of that old boat, Mike.

gplume · Post by **gplume** » Feb 22nd, '10, 21:20

At one point in my boats life it had a full blown swordfish stand (see image). Mikes post inspired me to show this shot. Its now chopped down to about 1/3 the length...and I basically just use it for anchoring.

I can take a some detailed pix of the current config if you are interested in duplicating.

CMP · Post by **CMP** » Feb 23rd, '10, 09:31

You're right Mike, the Youngs build a great hull and I loved my old beast. Thanks guys. John, that's the one I was looking for. I actually just got off the phone with Butler and I think I'm gonna go with a teak pulpit. Since there's no wood on the boat save for some handrails on the top, I think it'll look nice and is only slightly more than the same one in fiberglass. Pulpit complete with full slot roller for under $900 shipped. Gotta confirm some measurements and how big the toe rail is late this afternoon after taking the kids offshore-finally got a decent day here in Islamorada. Thansk again, boys...

CMP

John F. · Post by **John F.** » Feb 23rd, '10, 09:57

Teak on that 25 of yours will look great.

CMP · Post by **CMP** » Feb 23rd, '10, 19:08

I'm getting out-voted 3-1 in favor of fiberglass. Decisions, decisions...

CMP

JohnD · Post by **JohnD** » Feb 23rd, '10, 21:01

I have a Butler swim platform it's nice and has served me well, the were good to deal with and I would use them again.

Go for the teak, it will complement the custom look you've got going.

br,
JohnD

scot · Post by **scot** » Feb 23rd, '10, 22:26

I like it John. I have been kick'in around the exact same design. How did you wrap the horizonal side pieces into the curved front?....glass without any wood?

Gives me some ideas. Thanks for posting.

Mike I'll pass on your posted idea, did provide a real good laugh.

Marlin · Post by **Marlin** » Feb 23rd, '10, 22:35

I just purchased a teak platform, nice, when I called they first said 2200$ , then he ask if this was a business calling, of course yes and the price went down to around 1300$ fyi

tunawish · Post by **tunawish** » Feb 23rd, '10, 22:59

Mark,

Not sure if your as well equipped down there as you were in NH but Buju had a line on some really inexpensive Plantation Teak last spring..

I stayed away from it because I couldn't pick it my self. DQ also had some checking issues but knowing that I'm sure you could hand pick a couple of boards.. I believe he also had some 10/4 and 12/4 all shorts ..perfect for your application..... at least 50% less than what I could buy it up here...

May be worth a trip.. ..

Ray

randall · Post by **randall** » Feb 24th, '10, 09:53

WOOD IS GOOD!!! (no pun intended)

John F. · Post by **John F.** » Feb 24th, '10, 11:21

Scott-

When I get a chance, I'll get some pics to you. The pulpit is basically 3 2"x5" planks that were laying around. I epoxied those together to make the pulpit (its about 16" x 5' total), and laid that on the boat. I then scribed 1/2" by whatever mahogany I had for the side pieces, and epoxied those to the pulpit. Everything was done/shaped with a circular saw, jig saw, palm sander, a few cans of beer, and any hand tools I had--that's all I had at the time. It wasn't that hard to do and was built out of scrap wood (I'd buy mahogany planks if I were doing it again) so the only real costs were sandpaper, epoxy, and paint.

John

CMP · Post by **CMP** » Feb 24th, '10, 11:30

Ray, I might give him a shout on that-I have his cell and I'm here in Isla right now. Yer right about me being not well equipped here-by design for now anyway...

CMP

tunawish wrote:Mark,

Not sure if your as well equipped down there as you were in NH but Buju had a line on some really inexpensive Plantation Teak last spring..

I stayed away from it because I couldn't pick it my self. DQ also had some checking issues but knowing that I'm sure you could hand pick a couple of boards.. I believe he also had some 10/4 and 12/4 all shorts ..perfect for your application..... at least 50% less than what I could buy it up here...

May be worth a trip.. ..

Ray

scot · Post by **scot** » Feb 24th, '10, 20:45

John,

So is the pulpit encapsulated in glass?

BTW mine will be BIG, I like big bow pulpits lol...so maybe I'll use Mike's example.

John F. · Post by **John F.** » Feb 24th, '10, 21:37

Scot-

I epoxied it but didn't glass it--rookie mistake. It was fine for a few years, but needed to be glassed, so that's my other winter project.

John

Buju · Post by **Buju** » Feb 24th, '10, 21:39

Mark,
Far as I know there is still some of that plantation teak available... But it isn't the same animal as FEQ burmese teak. Behaves more like ipÃ©... Ray knew from the get go. But yeah, it sure could make a decent pulpit. If you want the contact info gimmie a shout.
I dunno though Mark, if you put a teak pulpit on her- then you obviously need a teak helm pod, and teak boards...

Tangier · Post by **Tangier** » Mar 8th, '10, 15:03

Timely question- Am interested in a pulpit as well- Would like one where the stem/shank of the anchor is "inside" the pulpit with the just flukes visible below.

I've looked at the high tide version- but doesn't show it loaded an anchor. Any thoughts appreciated-

Harv · Post by **Harv** » Mar 8th, '10, 19:40

I like wood also..... I'll be modifying this to accept anchor roller and winch in the future.
It was able to hold me when I weighed 275. Don't know if would try it now at my present weight,
since quiiting cigarettes.

CMP · Post by **CMP** » Mar 9th, '10, 10:54

Tangier, this is the Butler pulpit I went with http://www.butlermarine.com/AP_Fiberglass.shtml

I'm adding a Maxwell 500 Windlass to do the hard work. Butler was VERY reasonable and easy to work with. They also do them in teak for about $100 more. I think I paid $700ish complete with no bow rail...

CMP

Eddy G · Post by **Eddy G** » Mar 9th, '10, 11:17

GlassTech made mine. They have the original molds that Bertram used for their pulpits. http://www.glass-tech.com/bow-pulpits.html
The many dock lines in the picture were in preparation for Hurricane Katrina.
Eddy G.

Tangier · Post by **Tangier** » Mar 11th, '10, 09:50

Thanks for the leads-

Appreciated.

bertram31.com

Bow pulpit...

Bow pulpit...

buttler swimplatform

Who is online