I did not get a Tee Shirt but I do have pics
Take a look
Harry
Dry Fit....take 1....take 2.....take 3
Moderators: CaptPatrick, mike ohlstein, Bruce
-
Harry Babb
- Senior Member
- Posts: 2354
- Joined: Jun 30th, '06, 21:45
- Location: Fairhope Al
- Contact:
Dry Fit....take 1....take 2.....take 3
I dry fitted the starboard engine in DeNada yesterday.......sure feels good to see the first engine sitting where she belongs.
I did not get a Tee Shirt but I do have pics
Take a look
Harry
I did not get a Tee Shirt but I do have pics
Take a look
Harry
hb
Harry,
Progress is great to see isn't it.
In the second pic, is that the fuel fill...black hose running athwartship? If it is, it seems to have a riser above the fill point on the tank...which will mean the fill-line might not be running constantly down which will cause a choke point and really slow filling....I only know because I missed it on ours and will have to redo the run of the line as ours dips down in one point and we are painfully slow to fill.
Exciting times, great to be putting her back together.
Nic
Progress is great to see isn't it.
In the second pic, is that the fuel fill...black hose running athwartship? If it is, it seems to have a riser above the fill point on the tank...which will mean the fill-line might not be running constantly down which will cause a choke point and really slow filling....I only know because I missed it on ours and will have to redo the run of the line as ours dips down in one point and we are painfully slow to fill.
Exciting times, great to be putting her back together.
Nic
Hull No. 330 1963 SF "Tennessee"
-
Brewster Minton
- Senior Member
- Posts: 1795
- Joined: Jun 30th, '06, 07:44
- Location: Hampton Bays NY
- Contact:
-
Harry Babb
- Senior Member
- Posts: 2354
- Joined: Jun 30th, '06, 21:45
- Location: Fairhope Al
- Contact:
Nic
You are right on target about the slow fueling. I have joked around about how a pair of Big Blocks can burn it faster than I could put it in.
I intend to redo the fuel fill hoses and will correct that problem. I do not understand why its rigged like this but the Fill Plate has a 6 or 8 inch nipple sticking straight up out of the tank then a 90 degree elbow that connects to the 1-1/2 inch dia fill hose.
By eleminating the long vertical nipple will in itself drop the hose at leas 4 inches.
I am really enjoying this project ! ! !
It doooesssssssss feel good to clean and rebuild from the floor up ! ! !
I have got to go out of town for a few days this week so most likely the next opportunity to work on DeNada again will be the end of this week.
Harry
You are right on target about the slow fueling. I have joked around about how a pair of Big Blocks can burn it faster than I could put it in.
I intend to redo the fuel fill hoses and will correct that problem. I do not understand why its rigged like this but the Fill Plate has a 6 or 8 inch nipple sticking straight up out of the tank then a 90 degree elbow that connects to the 1-1/2 inch dia fill hose.
By eleminating the long vertical nipple will in itself drop the hose at leas 4 inches.
I am really enjoying this project ! ! !
It doooesssssssss feel good to clean and rebuild from the floor up ! ! !
I have got to go out of town for a few days this week so most likely the next opportunity to work on DeNada again will be the end of this week.
Harry
hb
-
Tony Meola
- Senior Member
- Posts: 6949
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
-
Harry Babb
- Senior Member
- Posts: 2354
- Joined: Jun 30th, '06, 21:45
- Location: Fairhope Al
- Contact:
Who is online
Users browsing this forum: Google [Bot] and 54 guests