Calling Bruce or other resolve

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
Chris Frank L.D.S.
Posts: 15
Joined: Jun 6th, '07, 12:45
Location: Morehead City NC

Calling Bruce or other resolve

Post by Chris Frank L.D.S. »

While fishing on an older post I noticed a transmission pressure gauge. I've never seen one before. Why is it there?
jspiezio
Senior Member
Posts: 882
Joined: Nov 25th, '07, 07:21
Location: Long Island, NY

Post by jspiezio »

Have these on the 32 Blackfin with 3208s. My dad added them after he burnt up a transmission on her once years ago .
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

LDS - it's to tell you that you have high pressure on the gear which makes it shift.....the real practical reason is when it goes way down your gear is out of oil and is about to burn up......good news is on most gears, ZF, TD, etc, the clutch plates will start slipping when its losing oil to warn you before you burn it up...I've busted a couple of gear cooler hoses over the years on AJ with no apparent damage....it will tell you plenty soon there is a problem.

UV
User avatar
Bruce
Site Admin
Posts: 3789
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

On old twin disc or Allison gears for that matter, it was handy to let you know the transmission was doing something 10 minutes after you put it in gear.

Modern standard duty gear boxes don't need them. Very rare does a pressure guage indicate a problem allowing you to shut down the gear to prevent problems. For that matter most failures of gears are the clutches and in most of those cases the pressure reading won't indicate a problem.

You'll notice your not moving before you'd see a guage problem.

The biggest gear killer is high rpm shifting. You'll be amazed how quickly shifting above 750 rpm or the quick fwd to reverse shift will kill a gear.

Panic shifting or the quick don't let the gear know what position your in shift, creates 85% of my gear repairs.
User avatar
JP Dalik
Senior Member
Posts: 1317
Joined: Jun 30th, '06, 21:03
Location: Pt. Pleasant NJ
Contact:

Post by JP Dalik »

The #1 modern day use for transmission pressure gauges is trolling valves. Use them to determine speeds for different conditions. For example 75lbs for 2.5 kts.
Without the gauge its hunt and peck. It also nice to look down and be sure you have engauged the gears upon completion of a days fishing using said trolling valve.
Plus they give you an excuse to blow another hole in the dash and run more wires for lights, yeah.
KR


JP
1977 RLDT "CHIMERA"
jspiezio
Senior Member
Posts: 882
Joined: Nov 25th, '07, 07:21
Location: Long Island, NY

Post by jspiezio »

Plus they give you an excuse to blow another hole in the dash and run more wires for lights, yeah.
I like the way you think son
User avatar
Brewster Minton
Senior Member
Posts: 1795
Joined: Jun 30th, '06, 07:44
Location: Hampton Bays NY
Contact:

Post by Brewster Minton »

I have them and like them. I guess they tell me that it is working.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 199 guests