B20 gets a new transom

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
JohnD
Senior Member
Posts: 409
Joined: Jun 29th, '06, 09:48
Location: Baltimore, MD

B20 gets a new transom

Post by JohnD »

I finally got around to setting up one of those pic sites. Here's some pictures. Unfortunately I don't have an in progress, so all are after the replacement had been made.

I found a local guy who does good work for a reasonable price. The old transom was shot, but the foam was good. The only sections which were wet was the vary bottom of the hull. In the area under where the motor goes was balsa core which was like a sponge! On the sides the foam was dry and in good shape.

At this rate, I'll have the B20 done before the B35...

here's the transom from the inside before the liner goes back in.
Image

here's the outside, he said the outside fiberglas wrapped into the cutout for the outdrive..
Image

This one is the liner section which was cut out. It was cut from just behind where the back wall of the cockpig goes and where my gas tanks were.
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 368 guests