Yanmar LP Exhaust

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
JohnCranston
Senior Member
Posts: 737
Joined: Jul 8th, '06, 17:50
Location: Spring, TX; Freeport TX

Yanmar LP Exhaust

Post by JohnCranston »

Quick Question for you LP 315 owners: What inch exhaust do you run out of transom. Looks like 4" at the turbo - do you run the same diameter the whole link or do you upgrade as you go on? One more for you - Are mufflers recommended?

:?:

Thanks John
I'll never ruin a $50 buzz with a $4 sandwich
thereheis
Senior Member
Posts: 244
Joined: Jul 1st, '06, 05:37
Location: bandera / port aransas tx
Contact:

exhaust

Post by thereheis »

i ran 4 in all the way to the end and out,,didnot use mufflers ...not loud at all...used fiberglass tube to almost the end then used blue silicone exhaust hose to outlet..sounds good ..it has a nice rumble to it ..

phil
User avatar
JohnCranston
Senior Member
Posts: 737
Joined: Jul 8th, '06, 17:50
Location: Spring, TX; Freeport TX

Post by JohnCranston »

Thanks Phil that is what I needed.

John
I'll never ruin a $50 buzz with a $4 sandwich
thereheis
Senior Member
Posts: 244
Joined: Jul 1st, '06, 05:37
Location: bandera / port aransas tx
Contact:

exhaust

Post by thereheis »

does your exhaust run on the outboard side of your stringer or in board ???if it runs inbord you might try and make a fiberglass double 45degor 90's glassed together so it drops down and out.then only use a small piece of hose,,

phil
User avatar
JohnCranston
Senior Member
Posts: 737
Joined: Jul 8th, '06, 17:50
Location: Spring, TX; Freeport TX

Post by JohnCranston »

It will be outboard because of my Cabrera fish boxes. Thought about running it out the side but don't really have anything to go by or copy.

Thanks

John
I'll never ruin a $50 buzz with a $4 sandwich
Post Reply

Who is online

Users browsing this forum: Stav and 375 guests