Filling holes

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
PeterPalmieri
Senior Member
Posts: 2568
Joined: Nov 12th, '10, 11:26
Location: Babylon, NY

Filling holes

Post by PeterPalmieri »

I can't find the thread I think John F had maybe someone can point me to it. I am removing old hardware from the bridge and need to fill the holes. I have all the west system stuff from when I did my hatches.

Doesn't need to be finish work as eventually I will have the bridge repainted just want to keep from getting water damage.
1969 31 Bertram FBC "East Wind" hull #315939
User avatar
PeterPalmieri
Senior Member
Posts: 2568
Joined: Nov 12th, '10, 11:26
Location: Babylon, NY

Re: Filling holes

Post by PeterPalmieri »

BTW Finally moving forward on getting my JP/Chimera style bridge canvas done by Charlie Johnson's guy.
1969 31 Bertram FBC "East Wind" hull #315939
User avatar
John F.
Senior Member
Posts: 2102
Joined: Jun 29th, '06, 07:58

Re: Filling holes

Post by John F. »

Pete-

I think this is the thread you're referring to. Sorry for the delay. Been slammed at work.

John

http://bertram31.com/newbb/viewtopic.php?f=2&t=9775
1968 B20 Moppie - Hull # 201-937
1969 B31 FBC - Hull # 315-881 (sold)
1977 B31 FBC - Hull # BERG1652M77J
User avatar
PeterPalmieri
Senior Member
Posts: 2568
Joined: Nov 12th, '10, 11:26
Location: Babylon, NY

Re: Filling holes

Post by PeterPalmieri »

Thanks john
1969 31 Bertram FBC "East Wind" hull #315939
User avatar
PeterPalmieri
Senior Member
Posts: 2568
Joined: Nov 12th, '10, 11:26
Location: Babylon, NY

Re: Filling holes

Post by PeterPalmieri »

John were you able to find a putty stick in a color that was close to the original gel coat?
1969 31 Bertram FBC "East Wind" hull #315939
User avatar
John F.
Senior Member
Posts: 2102
Joined: Jun 29th, '06, 07:58

Re: Filling holes

Post by John F. »

I was going to repaint the boat, so I didn't try to find anything that matched
1968 B20 Moppie - Hull # 201-937
1969 B31 FBC - Hull # 315-881 (sold)
1977 B31 FBC - Hull # BERG1652M77J
User avatar
TailhookTom
Senior Member
Posts: 985
Joined: Jul 3rd, '06, 14:12

Re: Filling holes

Post by TailhookTom »

PeterPalmieri wrote:I can't find the thread I think John F had maybe someone can point me to it. I am removing old hardware from the bridge and need to fill the holes. I have all the west system stuff from when I did my hatches.

Doesn't need to be finish work as eventually I will have the bridge repainted just want to keep from getting water damage.
I'm assuming when you say it doesn't need to be finish work, you mean as far as matching the color? Oherwise, fair it and fair it some more now, it is easier to do it now than to have to do it later, or pay someone else to do it. The devil is in the details.

Tom
User avatar
PeterPalmieri
Senior Member
Posts: 2568
Joined: Nov 12th, '10, 11:26
Location: Babylon, NY

Re: Filling holes

Post by PeterPalmieri »

Tom,

I had the topsides but not the bridge painted a few years back by Raybo. I plan on doing the same with the bridge either this winter or next. Something that is close is a good temporary solution for me. I'd certainly prefer not to have red or green bloches all over the bridge but it's not super important, I just don't want water intrussion. That being said if I can find a putty pad that is close why not.

For now I'm getting the old snaps, windshield and rail out of the way so I can get the eisenglass where I want it. Removing the rail also means having around 20 or so holes in the brow to fill in. Later I will remove some antenna, outrigger and other hardware that is abandoned.
1969 31 Bertram FBC "East Wind" hull #315939
Post Reply

Who is online

Users browsing this forum: No registered users and 293 guests