Getting ready to set up the fuel system for polishing the diesel
what is everyone using Racor? Tony athens seems to have a nice product,
Just curious what most people are using
diesel fuel filtration?
Moderators: CaptPatrick, mike ohlstein, Bruce
- Olivier
- Standing Member
- Posts: 40
- Joined: Jun 23rd, '13, 07:18
- Location: Puerto Princesa, Palawan, Philippines
Re: diesel fuel filtration?
Hello Spencer,
On my CUMMINS V504 i used only one RACOR filter (2 micron) by engine without any problem, i just add a gage to know if the filter is clogged, but until now never happen.
Regards
Olivier
On my CUMMINS V504 i used only one RACOR filter (2 micron) by engine without any problem, i just add a gage to know if the filter is clogged, but until now never happen.
Regards
Olivier
1972 BERTRAM 31 hull number NJZ594940686
Re: diesel fuel filtration?
I'm setting up my system so that prior to the Racors (1000ma's) my fuel will go through an RCI fuel purifier...
http://www.rcitechnologies.com
Basically the setup will allow (with two external pumps) polishing of the fuel while at the dock or on the hook as well as filtration during regular operation... If they work as advertised (and I have no doubts on that as a friend uses them on his boat) I'm going to put the smallest size (2 Micron) elements in the Racors...
I'm going to take pictures of the system when done...
http://www.rcitechnologies.com
Basically the setup will allow (with two external pumps) polishing of the fuel while at the dock or on the hook as well as filtration during regular operation... If they work as advertised (and I have no doubts on that as a friend uses them on his boat) I'm going to put the smallest size (2 Micron) elements in the Racors...
I'm going to take pictures of the system when done...
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 172 guests