Sea Trial!!! + video

[JimmyG]

Ok after years of work I got to put the hammers down! No vibration,no smoke, silky smooth and PLENTY of power! Yea I had a big fat smile on my face LOL. We have to put more pitch in the props WOT was 35Kts @ 3060 RPM 82% load. At idle (700 RPM) both engines in gear I was at 5.3 knots. With Capt Pats oversize rudders not only did I turn on a dime I had full turning with only one engine in gear....here is a short clip.https://www.youtube.com/watch?v=Wq9z39P7jAI

[John F.]

Congrats. Fuel efficient rocket.

[bob lico]

jimmy those are my exact numbers but a little higher speed at idle i normally have to run on one engine in 5 mph. zone and even then about 5.7 knots .what are your prop specifications now?

[Rocky]

That's one happy dude right there. I'm happy for ya Jimmy great job! Ye Haa!

[JimmyG]

jimmy those are my exact numbers but a little higher speed at idle i normally have to run on one engine in 5 mph. zone and even then about 5.7 knots .what are your prop specifications now?

4 blade Acme props 21x23 not sure of the cup size yet, we are going to get a full range of numbers and give them to the prop guy and let him work his magic we are thinking another inch of pitch maybe

[mike ohlstein]

I love the sound….

[Harry Babb]

Many congrats to ya Jimmy......

hb

[bob lico]

i need side view of hull but it looks right .at 22knot boat should be touching water (white water) directly below pillar and at 32 knots riding on inner strakes ,bow proud water breaking at main bulkhead if so change to entire prop. cupped (around entire ear) and raked 5 degrees and she will carry herself to 38 to 40 knots with go to sleep at wheel in 3 to 4' seas. best fuel economy back off to 2300 rpm ------------trust me!

[Kevin]

Looks good, sounds good and fast as hell! What more could you ask for? Congrats Jimmy.

[CaptPatrick]

Pretty work Jimmy!

[matt ciarpella]

You a Killer Jimmy...

[JimmyG]

All lights are all working now

[Bob H.]

That big smile when you hammered down says it all...enjoy the heck out of her..BH

[Navatech]

Good job!!!

Your smirk at the end (well deserved of course) says it all :-)

[Tony Meola]

Jimmy

Sweet. Glad it all worked out for you. That is one heck of a boat you built.

[Gert van Leest]

a beauty that can last for another 40 years !! Congrats !! Nice work buddy !

[williamcash]

Hey really nice work,
What was your optimum cruise based on speed and fuel economy.
Love the motors and the sound.

-WC

[JimmyG]

Hey really nice work,
What was your optimum cruise based on speed and fuel economy.
Love the motors and the sound.

-WC

I'll have numbers soon, still weighting on my new props

[gplume]

Jimmy-

Oh what a feeling........Great looking rig.....i 'm with Mike....Love the sound.

One question...looks like go pro video. What do you use for editing the files?...software and os?

All the best
Giff

[JimmyG]

Jimmy-

Oh what a feeling........Great looking rig.....i 'm with Mike....Love the sound.

One question...looks like go pro video. What do you use for editing the files?...software and os?

All the best
Giff

Thank you, Final cut pro OS X