bertram31.com

coolair

Cool Thanks for the info Ya, i was planing on keeping the heaters a ways away from the resin. We have a like 15x30 morgan building at our shop, going to use it as my paint booth. Ya i dont much care for winter either, business slows to a crawl and latley its been raining, yards muddy, sucks. plus it...

coolair

OK
I know you shouldn't glass under 65 degrees. but if i wanted to heat up my work area, would it be safe to use a kerosene heater, or will it cause the fumes from the resin to explode!

coolair

Generally speaking in commercial situations, a unit is good for about 10years. Dont get me wrong, they can and will last longer, but cost of repair and maintenance starts to add up, as efficiency drops. And generally speaking, in all a/c systems lack of maintenance is the problem, mostly dirty coils...

coolair

buddy sent me this

http://www5.snapfish.com/thumbnailshare ... E=snapfish

coolair

it doesnt matter how many times i see that video i still laugh my ass off. I know it all sounds cruel and mean, but if you could just see the damage the do you might understand. Just look at the stats Capt. Pat wrote. one back breaking day plowing or mowing a field where they have been you will hate...

coolair

next time i see him i wiil,
you gonna be at boat this weekend?

buddy wants to look at a 50 bert for sale down there, might ride down

coolair

i guess that is what insurance is for..
gosh, can you imagine how awkward that phone call was "fred..um i got some bad news bout your boat"

coolair

ahh well nice too know thank you John guess i better cancel that check haha good to know, right now luckly i am good on glass, i have most of it covered. But its good to know another glass guy, My office is across the street from john at miffco, and blocks from Leon. Both i think are pretty good gla...

coolair

yep, think i want to build one

coolair

Ya, i was joking with my budy abou putting it in his 31 albamarle,

coolair

10-4 John
i appriciate the offer, i will see what i can do, problem i have with being in a lodge, is i tend to drink waaay too much... oh wait thats not a problem never mind haha
Thanks
Matt

coolair

OK so what can you do with your old tank, I am pulling mine, and from what i have seen it is still in excelint shape. Could you use it say as a transfer tank. just to move fuel, or would that short amount of time with the ethonal eat it too. IDK i am at a loss, mine seems to be in prefectly good con...

coolair

Kipp
Keep us posted on what they quote you, i really need on for my boat too.

Who or what is Salvidors?

coolair

Ya stupid range master, they always get pissy when you rapid fire or shoot crazy ammo. I saw these things somewhere, supposedly legal, they are exploding targets, when you hit them they go boom.

coolair

Ya, i know they are alot, i was gonna settle for a night scope, but one that can handle a 50 is still expensive as hell, put that on my wish list, along with some fully auto something or another Bob, the internet is an amazing thing, and so are the gun shows. I am a avid gun enthusiast, and sometime...

coolair

That is Freaking awesome!!!
i want a thermal scope!!!

coolair

Honestly I can not remember, maybe it was 10 for vinyl and like 12/15 for glass, My wife wanted to get it for me for a present, but didn't realize how much they cost OK, where is salvidors, and what are they. you guys are keeping secrets from me.. and i have heard of dos amigos, arent they reproduci...

coolair

They very well maybe tired, hell i guess they are almost 20yrs old, previous owner guessed a 1000hrs. In my head, my '88 chevy isnt that old, but in reality its a classic now. its a 31 FBC 1969 model, i had full of fuel and 3 people, i think the boat weighs dry, bought 10000. I forgot exactly what t...

coolair

Kipp the obvious choice is tops and towers, but they are very expensive, the quoted me anywhere from i think 7-over 10 for a half tower. depending on if i wanted fiberglass or vinyl top. there is a company on ferris drive in bellaire, but i dont know there name. you getting rid of your old top? wher...

coolair

sweet, i remember the first time i shot a 44 lever action, my shoulder still hurts

i was watching monster quest, and they went to Alabama, crazy guys use the dogs and track them, then i guess cut there throats

coolair

Ya but screw those guys, i know we all gotta make a living, and all the limits of liabilities and legalities, maybe if they spent less money on lawyers and more on customer service... but if my company goes under due to poor management... no body is gonna bail me out. and i second the "my stupid tol...

coolair

yep, thats them mopar marinized fords, what a combo. Ya thats what i was thinking. I just wasn't sure, I called the Chrysler dealer here and they didnt know, go figure. So, if i am only geting 3500(assuming my tachs are right) or or so i am probably over propped?? right? 1.5-1 with 17x19 props, Than...

coolair

Any of yall had any expierance with the chrysler M460,
I have the service manual but it doesnt show the WOT, thats mainly what i am looking for.
Thanks
Matt

coolair

If you have ever ran a tractor through a pasture they have destroyed you will hate them forever. they literaly distroy everything in their path. they have also gotten bigger, and more agressive. defentaly wouldnt want to run into one unless you were armed.

coolair

i know i have seen those, i am probably going to copy johns design, hope he doesnt mind! i guess my dumb question is on this lay up, is the 1708 on the outer side of the panels.. so 1708-wood-1.5oz-wood-1708 Epoxy glass one side of each panel with 1708 biaxle fiberglass cloth. Lay on another layer o...

coolair

All i can say for brazing, use the good silver solider, 15% not the cheap shit and if heat is an issue, make sure you sand and clean the joint really good, and the solider should flow! put a wet rag around maybe? when we have to braze expansion valves and other valves that have seals in them, we usu...

coolair

hehehe!
damn hogs!! i

coolair

not to create anymore turmoil but what about the cats? i know that the 3208s are ok and that like the 31somethings suck, but what about the new i think c7s? or little mtus? i know some of the older Detroits are ok, but really loud and not all that good on economy. Matt oh and yall that have the towe...

coolair

Ya, i might not make the big bucks, but at least i get to do what i enjoy(but writing your own check can be very stressful) . Randall i still cant get over how beautiful your work is, i just cant comprehend how you take a block of wood and turn it into those beautiful pieces of art...as far as a "ha...

coolair

As of right now the bench will be mounted just like the old one with angled aluminum brackets on the side of the fly bridge. have not decided how wide or tall to make it yet.
Thanks
matt

coolair

capt. Pat
i have read the building tips and on older post on lay up schedule for the bench seat. But would the schedule for the rudder shelf work just as well? i mean 1708 is some thick heavy stuff, i was really surprised when i saw it at the fiberglass supply
Thanks
Matt

coolair

Now that is funny! ya i saw few snowmen today, to bad you didnt have your pool heater
Matt

coolair

Bob
are your fittings steel,stainless or brass?
I think my bro said he uses brass on his boat because they corrode like steel
Oh and where do you get the "list" of the CG requirements, i might put a charter permit on my boat, and even if i dont i want it CG approved.
Matt

coolair

that is freaking hilarious!
this is the earliest its ever snowed in houston, not the first time though, neither was last year

coolair

Again Randall, i wish you the best, the only ray of hope i can offer, is my buddy shattered his wrist when he fell off the 2nd floor of his fraternity house, and landed on a railroad tie, hes ok now, it took at least a year to rehab though. and my mother in law broke her ankle last year, was in a ha...

coolair

ya, alittle snow last year, and now this, and it was in the 40s in montanna and the damn snow was starting to melt. speaking of gore, my buddy read an article, that said all the "reports" on global warming were "exaggerated" and its really not as bad as the say, and surprise surprise, one of the hea...

coolair

ok thought so, wasnt sure if you could used the screw type fittings like in normal hydrolic hose.
OH and the fact that i didnt notice the "shower" deal till after yall said something, is just one more reason i am not going with diesels any time soon... i dont know crap about them!
Matt

coolair

bruce, bob
are these hoses made on site, or are they crimp on fittings?

coolair

both installs are just beautiful!
ok dumb question, but whats up with the blue fuel line? what happed to the old black stuff?

coolair

haha,
ya i should, and then he can come help me with mine. I still got to get my deck off!!! and tank out!!!

coolair

LOL
Thanks Pam, tell john dont worry i am not geting rid of my 31 for a long long time.

I was just looking at maybe the next project. as if i dont have evough to do now haha
thanks again

coolair

John
you know this boat?
http://www.yachtworld.com/boats/1972/Be ... ted-States

coolair

i think i want one now!
check this custom 25 out

http://www.yachtworld.com/boats/1965/Be ... ted-States

boat from video

http://www.yachtworld.com/boats/1963/Be ... ted-States

coolair

just wondering anybody heard anymore on this. my buddy said he read on another board the hull delaminated, like another 63

coolair

Nice!

coolair

coolair

Nice, I think my buddy and his father-in-law took there first dear this year with bows. is the brow tine broken or does he not have one? I probably haven't shot a whitetail in, 5+ years. Plenty of birds, hogs, and gofers though I bet thats a cool photo of the night shot. honestly the only thing i am...

coolair

now now children! :)
oh and texans do suck!

coolair

Bob that would be cool to see the pics. and all i can say is F*ck that. Not being able to cary a side arm, just to be safe is a dumb law, i dont think bear mace will do anything but piss them off! But it is what it is. I have been pretty close to a few black bear and seen some grizzlies from a dista...

coolair

bob
u r nuts!!!
i dont get you guys and bows and bears
if i am going after a bear,(which i will probably never do) i am bringing at least OH i dont know a 454 casull and a 300 win mag
and ya its a bitch when you loose one hand, but i dont have a problem doing any polishing haha

bertram31.com

Search found 787 matches

dumb heater question

M460

rudder shelf/bench