bertram31.com

34Hatt

Howdy All Its been a while and I see I missed a PM from Mickey sorry new position at work and it has sucked up all my free time. Really nice progress hell I just got my hatches redone the way I wanted them this June also after 20 years. I see you got the air vents done without me :-D They look great...

34Hatt

Moving along nice. What height do you have from water line to turbo because in the 34' C it is marginal with out risers that was why I added surge tubes and flappers I copied from another 34 that spent a lot of time offshore and it was a easy addition. Keep at it your getting close to the real enjoy...

34Hatt

Wow looking good did a lot so far this bring Old memories and some not so Old ones. I have had my 34C for 19 years this month and just finished redoing the hull for the second time did it 18 years ago. I can't believe Timmy didn't tell me about this thread oh wait I forgot who were talking about nev...

34Hatt

thuddddddd wrote:

it will (I hope) see the water ...

Oh Crap you did it again!

34Hatt

Timmy As for the 41 I will fill in for Capt Pat and lend you my chainsaw ! So the story behind that is back in Montauk at a Rendezvous we are on Brewster boat heading out for a ride. Tim starts asking Captain Pat about what material to use for bulkheads and his response was " Timmy I tell you what I...

34Hatt

Dug

Boat looks fantastic ! Lots of good times to come enjoy.

Just cant figure out which one you seem to be prouder of your boat or your daughter being on the boat.
Both seem to make a great combo !

34Hatt

Wow I am so sorry to hear this the world has lost another great one, talent & knowledge that won't ever be replaced.
My best wishes and prays to his family.

34Hatt

Watched Keith on Dugs link Thanks Dug then saw the second one on Tv Keiths show about Mako's I thought was way better.
Happy to see Keith is the smart one and stays in the boat when the Sharks show up!

34Hatt

How are you going to tint them you can't use the stick on film with plastic.
Been told by multiple tint guys it won't work never did find out why?

34Hatt

Oh I can picture it.
He told me the story but he did leave out the Chalk line but maybe he could remember that?

34Hatt

34Hatt Where did you pick up that work light? Do you have a model number? I've been looking for some lights for my shop and haven't been impressed with what I've found locally. Danny Dan Got it from a friend to use, it is for his Garage I am hoping maybe I don't have to return it well see we always...

34Hatt

Got this one for working on the boat it is blinding even in the day time but just what was needed.

34Hatt

Boy this place is really going to hell now ! Thuddd knows we still talk about him talked to him a month or two ago he helped me with some technical question on replacing my side windows. His boat is still a planter he should have taken Capt Pat's offer of his chain saw dam shame but things change an...

34Hatt

Dug

She is looking great well worth giving up a season plus sounds like you were busy enough !
Lots of luck can't wait to see it in the water and some blood on the deck again.

Dan

34Hatt

I use East coast diesel in Lynbrook long Island
Great service honest and lots of experience there specialize in Turbos, Injectors and pumps.

http://ecdieselsvc.com/

22 N. Prospect Ave.

Lynnbrook, NY 11563

Tel: 516.887.9220

Fax: 516.599.8560

mail@ecdieselsvc.com

Ask for Derek

34Hatt

Tony Meola wrote:Dan

That is Kiwi Grip that you sprayed correct?

No that is Awlgrip with their fine additive. After doing the gunnels with Kiwi I was not happy with it so I am doing it all with Awlgrip.

34Hatt

I did all fine but loaded up good on the first coat then added just a little bit in the second coat. Happy with the results now just have to finish it including the hatch's yes that is plywood with primer it was time to use it and thought I would get them done during the summer which did not happen!...

34Hatt

I can help with my experience with it. I bought it to do the cockpit and the gunnel area the first year I only got the gunnels done. It is tricky to get a finish I like it all comes down to how much you put down on the surface the more product applied the coarser the finish which results in holding ...

34Hatt

Tom Here is what I did when I did my engines worked great closed it in under the boat and put a torpedo heater in there with a thermo stat set it for about 95 degrees and had radiant heat. Epoxy and paint dried in a flash and no smell or fumes from the heater. Good luck with the repower. Dan http://...

34Hatt

Wow she is a sweet rig Bob

That is the first party boat I have seen that makes me want to do a trip on Keep us informed.

One question what is in the big bottle in the galley at the end of the counter?

Lots of Luck on your new endeavor.

Dan

34Hatt

Out to sea will be the best but I am going to boat this afternoon and start prepping more I do in prep better chance of it never being bad ?

34Hatt

Brewster

Glad to hear all went well was hoping to see in Greenport but I arrived late on Saturday and Neil told me you had already left.
Good luck Fishing down there.
Catch them up.

Speaking of which Neil what was the final outcome of the boat Jr was fishing on that weekend?

Dan

34Hatt

No problem Bob I have met lots of Good people in this sand box sounds like you got a plan if you need help I will be in the area Friday a.m and may even see you coming through the peconic. I will be coming out of Riverhead back in the butt crack of the peconic and will be watching for any 31's makin...

34Hatt

sure wish i had a couple brothers that wanted to go by boat from Oakdale NY. to Greenport. this would allow me to go thru shennecock canal and cut trip considerably .i need the put down outriggers and antenna to clear two non opening bridges.just hold on to them for 5 minutes to go under bridges .m...

34Hatt

The only reason I'm busting your balls is because you are the leader of the mean team and you need to show up maybe with timmmmyyyy Hope to see ya soon and thanks for doing what you do with the site. We have met the best group of guys via this site thanks neil I have tried in the past to get Thuddd...

34Hatt

Possible 31 being built again.

http://www.tradeonlytoday.com/2015/02/m ... am-yachts/

Dan

34Hatt

So on the Fish the chart doesn't have a fish column figure it falls under Wild uncooked game?
I still have Mako vacuum bagged and is about 10 months now I say lets eat Wife says to old?

34Hatt

I want to be weighed by that scale if that Mako is 215 -- I might finally be under 200! Tom Thats funny Tom I actually had the thought the next morning I should have hung on it to see what I weight I am sure I would have been back to teenage weight ! Guess I can consider it around 280 lbs without t...

34Hatt

So yesterday we got a nice Mako we estimated it to be 250+ being what we thought was conservative. Stopped on the way back in at Jackson's and had it weigh the Kid doing it guess 300 lbs so all the #s were between 250 to 300. It was 83.25" from nose to curve of fin so the Kid is up there and we hear...

34Hatt

Newmar profish 1000 is Great!!!!

Had a powerwinch prior what POS that was I actually was happy when it went to shit!

34Hatt

Here's some pics of Ed leaving Montauk back in 2007 after the B31 Rendezvous

She sure did STICK out then.

Good luck she looking good.

34Hatt

Bass and black drum If you're going to Va you need to say Rock and Drum My bro lives there we go back and forth all the time on the Rock fish I tell him they all don't live under a Rock and don't look like one! You should see the looks I get LOL! Good luck! I may make it to White water I will look ...

34Hatt

Dan, I got it. Yes, I have one like this, just outside the bathroom, under the sole. It's the one marked "bilge pump" on my electric switchboard and it is only manual. It is destined to collect any (little) water that might find itself down there (shower overflow, emptied bottle by accident, cabin ...

34Hatt

Love the teak. One suggestion your under the deck area is limited like mine was instead of a sump pump that gets clogged with crap I went with a Gulper diaphragm pump. I just added a drain elbow and brought it into the engine area for access then just turn it on and off when needed. Been in for 12 y...

34Hatt

What size shaft I have one but its for 1 3/4" shaft

34Hatt

She is a Nice one but needs some hull paint and some TLC its called Private Eye and use to be Ram Rod.

You Guys are talking Nice about a Hatt I sure do hope you're not getting Soft.

34Hatt

Wow first a phone call and now you post guess you did get out from under that Rock!

34Hatt

Bob, it would be a ride for you and a $15.00 toll for the VZ Bridge...but you welcome to come by and use my stuff. Not sure if my surface table is large enough at 24"...but we have other ways of checking. I'd be somewhat at a loss if you needed to tweak...we have limited service work tooling left h...

34Hatt

1-1/2 shaft, Cutless come in two Standard Sizes 2" OD "BOSS" 2-3/8" OD "BRAD" Bob, Surprised you didn't go with Thorden...it has better coefficient of friction then the rubber bearings making these things last and last with a bit better economy. Yes it is and I too needed a 1 7/8" od with a 1 1/2" ...

34Hatt

Been following your project Outstanding Job She is sweet !!!

Looks like a Good summer this year!

34Hatt

As a suggestion maybe who ever is first, make the first one into a plug. Just a nice heavy strong layup with a flange then save that and you can always make more molds.

Nice piece to have good luck.

34Hatt

You will find it come off much better if you heat it first good heat gun warm the area then use the scraper or multimaster.
I use this method on Formica and veneers

34Hatt

34Hatt

He still Kicking and carving here is what I have of what he has been up to. [quote author=randall board=blogspot thread=2424 post=417015 time=1348796524]look...i'm a star in turkey http://i112.photobucket.com/albums/n186/randallro/392068_10151099665827885_1667256812_n-1.jpg [/quote] i'm in a group s...

34Hatt

As for more on safety of diesels I have had to many gas engines not deliver when the throttle was used in a bad time. Inlets, running the locks when open and such always dreading the cough or stalling. My Diesels It never even a thought anymore, I untie 90% of the boat before I even start them. When...

34Hatt

Very nice

I too would like to share this one, everyone should watch this.
Passing the flag to the widow got me.
Thanks Capt Pat

34Hatt

Frank
What size lee I have One yes only one 22' double spreader Lee if anyone need one!

Frank glad the pump lead was a good one for you, your welcome glad to help.

34Hatt

Frank I agree March has a much better rep. Never fixed one but $400 is high.
Here's a 510 gallon for $236 http://www.marinaire.com/category_s/25.htm
just bought a a.c from then good company to deal with.

34Hatt

all the shit I've posted lately is gone? all the wit and humor and degradation of the RLDT was wasted..... You mean stuff like this? wrote: I remember when JP used to call...... :cry: Yeah this is some funny sh*t coming from you!!!! Go find a Mirror ..... Not Gone Not wasted just in another time zo...

34Hatt

Brewster Minton wrote:4.35 here

Brewster 4.10 right across the Bay at Lighthouse Marine. And dropping every week they post their price on their website so easy to check.

Search found 261 matches