bertram31.com

Todd Pearce

Pete, i was hoping you'd chime in, i new you would know, ill ring him tomorrow, many thanks for sharing your wealth of knowledge so freely

Todd Pearce

thanks for that, Any body know what style and size rupps the B42s had as standard?

Todd Pearce

hi, i need help identifying which brand of outriggers these are from ? my boat arrived minus its outriggers and i would like to try and find the original type to put back on the boat http://i1328.photobucket.com/albums/w537/toddpearce31/parts_zpsxq7t44tl.jpg http://i1328.photobucket.com/albums/w537/...

Todd Pearce

will some one, for the love of all things Bertram,please post some pics of the new 35 from the show , Bertram don't have any photos up on the web site yet , and i am dying to see some pics

Todd Pearce

thanks for that, will try

Todd Pearce

Hi can someone tell me the price of teak n holly ply sheets , the price down here seems ridiculous
Regards Todd

Todd Pearce

hi to all, In 1993 thru 1996 bertram made a new 46 which went on to become the later 450, in the 46 (not the old 46.6 mark 3) there was a three cabin version, my questions are , what was this 46 model like , was it well built , did it ride as good as my current B42? basically was it a great boat, an...

Todd Pearce

Hi has anyone seen or used this product for tuna towers, they advertise it on Craigs list and it looks good enough, but wondered if anyone had used it?

Todd Pearce

Cap , whats the current balance required?

Todd Pearce

Pete , thanks for the feed back, I found a company call Marine Industries, in Michigan and Tennessee , www.marineind.net, they do solid sst half round in a verity of profiles ,pre drilled and polished, with finishing ends etc looks great and they have been very helpful to deal with, have placed an o...

Todd Pearce

As an interim fix I have decided to paint my alloy rub rail and wish to replace the SST cap, cant seem to find a supplier down here so any advice would be greatly appreciated
Regards Todd

Todd Pearce

hi ,I know its off topic but have you considered a B42? i have one and I just love it!!others here will be able to tell you more than i,but my homework pre-purchase lead me to believe that its fuel burn and roll factors were very good and similar to that of the 37-38, i ve just returned from a week ...

Todd Pearce

You guys have all the tricks!!!

Todd Pearce

pete will get some photos posted up soon as ,
cheers

Todd Pearce

my B42 project has finally turned the corner, just reinstalled the engines after what was going to be short block rebuilds that grew into complete rebuilds, but its worth it for the piece of mind that everything is perfect, so know that we have completely re-engineered the mechanical its on to the c...

Todd Pearce

WOW!!! that's fast

Todd Pearce

hi, I see there is someone advertising NEW baron decks on graigs list FL for 13000 ,other than that I no nothing except they look very cool

Todd Pearce

wow ,bob they still look mint, nice stuff

Todd Pearce

thanks for that, after some homework we have decided to go with altex no1 primer and their two pot enamel , according to them ,its the way, checked with two other guys who did it 4-5 years ago and they tell me all is well with theres , so fingers crossed its right

Todd Pearce

I am still laughing, that's some funny stuff bruce

Todd Pearce

did your friend find a B37 ?? if not there is an add on Craigs list in "outerbanks" for a boat with cats ,which would be desirable in this part of the world, the add reads well and sound like the guys owned it since 1996, asking 79000, its not related to me in any way ,just spotted it and remembered...

Todd Pearce

I have my motors completely stripped for rebuilds and have read about people using awl grip for the engine paint,any thoughts ??

Todd Pearce

alloy or plastic?

Todd Pearce

Gert, as usual you've blown us all away ,awesome looking boat, can you tell me what you did for the rub rails?

Todd Pearce

http://i1328.photobucket.com/albums/w537/toddpearce31/38E7B91C-3411-4D85-8175-711905256F08_zps3lchga4u.jpg Hi to all, this is the front mounts on my 6v92s,conventry conversion at the factory for my B42, we are currently rebuilding both engines and would like some help in finding replacement bushes ...

Todd Pearce

hi gert, have to say the 37 is one of my favourite bertrams,I have a B42 and the rubrail is shot, what are you going to replace the old rubrail with?
Regards Todd

Todd Pearce

for what its worth ,I`d take the dd`s any day vs the cats ,and I`d agree C series cummins would be awesome, but when I did my research, the cats in a b37 performed very well giving 20 plus knots and the 92 dd`s giving late 20 knots,to be fair the B37 I`ve been on had 6v92s@ 475hp,so cant speak first...

Todd Pearce

I have been watching that boat since it came on the market two years ago, was originally on for $129000.00 I purchased a B42 for family reasons but those 37s are a fine boat there's 3 or 4 here in nz, the cats are favoured in this part of the world so hes on the right track ,I was told by the then b...

Todd Pearce

Looks like I need to replace the fuel valves in my B42,1986, the two engine valve switches may be a bit old and tired and I was hoping to make life easy by replacing them like for like, they look simple enough but they control the fuel supply and I think the return flow all in one , on the top plate...

Todd Pearce

from my home work so far it looks like the 95-97 B46 is a completely different hull. up until yesterday I didn't even know it existed, which makes me wonder why? Why was its model run so short? Was it a Pig? The 71-88 b46 was 16ft beam the 95-97 was only 15ft,and it was some 5000 pbls lighter, the 9...

Todd Pearce

I read some article about the 95-97 B46 online sometime ago and now cant find it,anyone out there know much about this model or where I can read about them? Iam keen to learn more about them and if they came in a three cabin lay out?
Regards Todd

Todd Pearce

Charlie, thanks for the offer but I`ve been in touch with him, and many thanks to you too tom, unfortunately it looks like its 55loa, and so wont fit, so to all out there I ask, whats the best boat up to 50ft LOA, sub 350k, three cabins galley up,??

Todd Pearce

Bob,, can you or anyone confirm that the LOA is including or excluding the bow Pulpit, its a deal breaker!!

Todd Pearce

Bertramp , to my knowledge the 37 was the successor to the 35 and is a stand alone hull,( dosent share the same beam as the 50ft at 16'3 ) and probably one of the best Bertram hulls ever,it was my choice of boat, but 3 kids made it a bit small , I did a lot of research and its a hull that everyone c...

Todd Pearce

JUST PLAIN SICK,damn that's cool

Todd Pearce

Bill if you could ask it would be great,i am not ready to buy just yet because I need to sell mine first and need to make sure it will fit my dock Capt Pat , did the Bertram official come onboard with the site ,if so how do ask him a question or two, also what sort of hard would did you use on the f...

Todd Pearce

the big question here guys is how long it is, my dock will take 50 ft,not an inch more!! the marina are very pedantic on this so 50'6 wont work, and ive been told every thing from 49'10 to 50'6, in the owners manual on the Bertram website it staes 49'10 but I am not sure if that includes the bow pul...

Todd Pearce

Hi, iam considering updating my Bertram 42,which I love, to a newer boat ie a late 46 or a B50 if it will fit on my 50ft dock, I want a Galley up boat prefer three cabin as I have 3 kids and we like to go away and stay away,sometimes for a week or two, we fish dive, and socialize ,I am a Bertram guy...

Todd Pearce

Hi Jim, I was hoping you could give me a little help ,I am considering updating from my Bertram 42 (1986 hin brmo816j587) to a Bertram 50, problem is my dock is 50 ft on the button and they don't allow any over hang, can you tell me the exact LOA including the bow pulpit, as an option I was consider...

Todd Pearce

this little guy came up the chum trail and let me feed him,greedy pig just kept coming back for more,click on the pick and it should play, I hope!

Todd Pearce

looks like a real sportsman but converted to O/B, not mine ,no connection, but thought someone here might like it, well priced as well craigs list baltimorehttp://baltimore.craigslist.org/boa/4400542796.html

Todd Pearce

HI, is there a repair/replace/compatible unit for the Robertson ap20 unit, mine is dead and I would like to fix it if poss ,rest of the system seems fine,a used one would be fine to if there is one out there in Bertram land
Regards Todd

Todd Pearce

I am on the sent of one ,just waiting for some pics and will ask for ID numbers ,should be fun,will keep you guys informed,, very exciting like hunting for buried treasure

Todd Pearce

How do you ID an original ?

Todd Pearce

How much is a fair price to pay for a good sportsman,not sure that I am up for another project right now, and does anyone know of one for sale,they seem rear ? how many were made
Thanks for reading
Cheers Todd

Todd Pearce

Perhaps owning the domain 'Classic Bertram.com', and redirecting the traffic to this site might help grow the numbers, also some of the suppliers out there get a pretty fair deal out of the site,ie classtech,hightide etc, may be they should be helping out a little?

Todd Pearce

can everyone please have a look at the membership section at www. Boatdiesel.com , I think that a version of this would suit everyone ,its well balanced, clear ,upfront, affordable, and guaranties a steady income stream for the site ,its self controlling as well in that ,if you want do anything othe...

Todd Pearce

I love that you went with that colour, Very classic,very classy ,shows some real style, I painted my last CC awlgrip prairie beige with white topsides and teak bright work accents,black covers, I`d love to say its was my idea but I stole it from a Garlington 80 ft sports fisher that was built here i...

Todd Pearce

wow, what a mine field, I for one never saw the complexities around this issue, I have contributed in the past, but not recently and have felt the prick of being a non bannered user, so much so it motivated me to email capt for the acct details, so on one hand mission accomplished and if we want thi...

Todd Pearce

going to replace the pressure tank and check the pump ratings ,will let you know the outcome
Regards Todd

Search found 279 matches