bertram31.com

Mizerita

I searched the forum and found a few threads, but haven't seen any updates. I also couldn't find Capt Pat's painting schedule / recommendations. I'm starting to see some corrosion around the cap / rub rails. Also, is anyone selling a PVC replacement? Seems this is an ongoing issue but couldn't find ...

Mizerita

Not familiar with those engines but the only thing I would have expected would have been the GPH at cruise to be closer to 15 gals per hour rather than 18. But compared to big blocks, 24 knots at 18 GPH is great. I was hoping for a little better, but both times we ran her it was blowing 15-20 knots...

Mizerita

John F. wrote:Glad is worked out well. A few pics of the install, and maybe a video of her running would be really nice....

I'll post some pics of the install and updated numbers once I get back from vacation. Definitely a few hiccups, but overall I'm pleased.

Mizerita

PM, text me at 813-786-5355, or email me at steve.mize@icloud.com - I may have a buyer for her in Key West.

Mizerita

They may have. I think originally they thought I was running 2:1 gears and when I called them out on being so far off, maybe they switched them...In any case, I don't think I'm too far off. I'll keep everyone posted on the performance over time. So far so good... smooth, responsive, and quiet.

Mizerita

I'm guessing that you are under loading the engines. Those gears are a mistake, and trying to correct that mistake by using the wrong props is only making things worse. I've run the boat twice with similar performance. Last week with 4 adults and 3 kids, ice, 220 gallons of fuel, etc...WOT at 3950 ...

Mizerita

So he changed the pitch from 20 to 16.5. I'll run her once the wind lays down by Sunday or Monday here in Key West. I'm not confident on their speeds as they didn't pay attention to wind, current, etc. Latest speed with Nibral 19x16.5 4-blade were 3900 RPM at 29.5 knots.

Mizerita

Mike, the prop guys suggested 19x20 4 blade Nibrals. When they ran it the first time they said 31 knots at 3300. They changed the pitch and ran it again and said 3900 at 29.5 knots. The boat will be back here in Key West this week and plan to run her full of fuel, ice, and people and see what the nu...

Mizerita

2nd run today with props "tweaked" a bit...just under 30 knots but ran 3900 so a 100 over the recommended RPM. Boat was somewhat light, but I still may add some cup and go at it again. Hoping to get back to 30 knots. I would also like to find Bob's prop post...if anyone can send a link I'd greatly a...

Mizerita

The guys at Marine Parts Supply in Canada hat the 1:58 gears also, but 3 blade 19x18 prop. Their test showed 30 knots at 3860. May have to switch props. What would be the advantages of going with the 2:1 gears?

Mizerita

I'll be posting pics and exactly what has unfolded over the last month. But, engines are in and tested today. The prop shop suggested 4 blade 19x20 nibral props. We ran her at 31 knots but at only 3300 rpms. Engines rated to 3800 so have some work to do on the props. Gear ratio is 1.5:1...not sure w...

Mizerita

53k for 270 and bravo 3?? is that right? I believe they were $48k with ZF gears. Current repower is going pretty well. New rudders, new fuel tank, engine beds, etc. I'll send pics in a week or so. Engines are in, 12 degree shaft angle, engines sitting further aft and lots more room forward to get a...

Mizerita

Will do guys. I tend to deviate from the norm and try new things...just my personality I guess. I'm happy to be the guinea pig...but if Bob is right, I will 100% let him know he was right. But if he's wrong, hopefully I've given a few guys another option for repower. I'll post pics over the next few...

Mizerita

I feel I should respond to Bob's post just in case anyone else is interested in these engines. Bob, I am a big fan of your posts and trust your opinion most of the time; however, my assumption is you haven't done any due diligence on the Hyundai product, and I doubt you have talked to technicians wh...

Mizerita

Well guys I'm biting the bullet. I've offered no guidance over the last few months and have been milking the group for as much info as possible...and I appreciate it. Hopefully with my repower I can actually help out a few people down the road and answer some questions. I've decided to repower Hei H...

Mizerita

Thanks guys, new rudders is probably on the list.

Mizerita

Tony and Bob Lico - I had a chance to measure my rudders and although Bob says "don't change those rudders"...there are a few differences in measurements from what Tony mentioned. The edge of the rudder closest to the prop measures correctly at 15 3/8, but the trailing edge furthest from the prop is...

Mizerita

I was going to save this for my own post, but I've talked to several B31 owners who have put in the Hyundai Seasall 270s and love them. With gears they are under $50,000 for the pair. Common rail, quiet and fuel efficient. The two B31 owners I've talked to are showing 30 knot top end and good cruise...

Mizerita

I've done 14 31's with just about every engine option in the day. From just engine changes to strip to bare hull and total rework and refit. Nothing special on the 31 I didn't have to address on all the repowers I did. Post your questions and concerns. One thing, don't over think or over research. ...

Mizerita

Steve- I sent a note on Instagram- not sure if that'll come through. We went through a repower proposal process last year and I'd be happy to share what received which may be a nice reference for you. I had similar concerns and something that became apparent is that there are several folks who real...

Mizerita

Mizerita...I'm in Pompano Beach...I have an excellent set of refurbished Caterpillar 3116 Marine Diesels with all exhausts, etc. ready to be dropped in...I'm not going ahead with my project so I am selling...If interested contact me at 954 290 6783...John John, thanks for the offer, and will certai...

Mizerita

Thanks guys. Yes, I'll be converting to diesel and know the primary "issues" and how big of a project it is. I've researched just about every post about repower and have a few options already, which I'll probably post separate about. There are separate Cummins, Yanmar, and CAT service guys in Key We...

Mizerita

As I start the discussion of repowering Hei Hei, one question comes to mind...do you typically pick the engine first, and then the person to do the repower because they have experience with that particular engine? Or is it more important that you find someone with B-31 repower experience first...the...

Mizerita

Thought we fixed the problem, but the problem came back after a few runs. If I remove the distributor cap / rotor (see picture below), the "arm" moves down and up if you pull / push on it. I think it gets sucked down which is causing grinding and the metal shavings I talked about earlier in the post...

Mizerita

Thanks Bob, they looked small compared to others I've seen, but I'll leave them alone. My only concern was they don't seem to steer well on autopilot. Immediately thought they were stock. Anyone else have these autopilot issues?

Mizerita

Yep, found the pieces of the impeller...and top of sea strainer basket. Replaced impeller and housing.

RPM issue could have been the distributor cap. I replaced it and if fired up and seemed to idle fine. Going to run her today and see if it was the culprit. Thanks guys.

Mizerita

Fuel from filter was clean. No water found in fuel and pulled carb, nothing. No droplets and no water to be found. Distributor cap had a ton of soot in it so had one overnighted and putting on this afternoon. On interesting thing. While on a work rack, we wanted to start the engine and see what it w...

Mizerita

Well...took delivery of the Double Bogie (now "Hei Hei") and all was good until yesterday. Starboard engine took some time to start, then while in idle quit at least 6 or 7 times. "Revved" it a bit and got it working; however RPMs were about below port engine at WOT (5000) and about 400 rpms off at ...

Mizerita

Thanks guys. The manufacturer is a 5+ hour drive by car...was going to have Stuart Prop manufacturer the rudders and a yard down here in Key West install them. This is my first inboard boat so I have no clue about rudders. I'll have the yard here pull them and see what we find.

Mizerita

Is there a way to know without taking off the rudder? Here is a pic:

Mizerita

I've read a few of the threads about oversized rudders and looking at having Stuart Propeller build a pair for me. He's asking about current rudder type. I believe mine are the original rudders - hull is 1962. He's asking is it option 1, 2 or 3. I have no clue and guessing I would have to remove pro...

Mizerita

What a beautiful boat. That boat and the Dry Tortugas… can’t ask for much more that that! I like to get down to Marathon and the lower keys every year or so. Next time we’re down, if you’re in Key West I’d love to stop in, take a look and say hi. Also you’ve probably already found your moving servi...

Mizerita

Steve, I apologize, as I was the guy that initially said something about "not being in love with the bench" on the other thread. I hope that didn't put a bug in your head. After that thread I gotta tell ya, I came across not only a picture of Marlin's bench, which is similar on Wahoo, but also a nu...

Mizerita

Steve, I had my bench fabricated by my aluminum guys. I am guessing you are not big on metal vs. wood and I get it, but I have a mini bench that seats three comfortably (or my dog) and I can walk around my bridge. Its a good set up in my mind. Otherwise you could always call Release Marine and see ...

Mizerita

By the way, I was able to reach out to the broker on Lady Marion and he's trying to find out the manufacturer of the seat. He did send me a few more pictures (below). Anyone know these seats or similar?

Mizerita

Steve, You mentioned you were on Lara- I really liked the bridge setup on that boat. I agree three chairs looks the best, but I get tired of climbing over a seat every time. I suppose it goes back how you’ll use it; if you’ll be camped out on the bridge trolling, three seats wouldn’t be a big deal....

Mizerita

I've got Yachting Solutions looking into options for replacing the bench seat on the bridge. I'm aware of the the width limitations of having seating for 3 on the bridge, but quite frankly I like the look of 3 ladder backs...so trying to see if there are any options. My thoughts would be: 1. Bench S...

Mizerita

Hey Steve, You have a beauty! I spent a fair amount of time on board at the show, and the detail is what is shown. Its a very nice boat. You should love her! Congratulations! Next time I’m in Key West (who knows!) I hope to say hi! Best, Dug Dug, yes, please drop me a line if you (or anyone) is in ...

Mizerita

Thanks for all of the tips guys...I've got a few quotes out there and should dial it in this week. Should have the new boat by mid May!

Mizerita

cariedl wrote:Try Gene and Move My Boat - 941.234.6096

He moved my Bertram from Long Island to Ohio. He regularly makes trips up and down the East Coast. Could be good timing as he is likely running boats North from FL for summer.

Good luck.

Thanks for the referral, I'll call him today.

Mizerita

Trying to get Double Bogie from Maine to Key West....or at least South Florida and then I can run her down from there. Anyone you guys would recommend? If you recall, Double Bogie has no Bimini / tower. We are shooting for a pick up date of May 16-May 18. Let me know if there are any recommendations.

Mizerita

Peter, yes the windows and everything else other than the flybridge were built / molded by Yachting Solutions. I'll see if I can find some pictures. And the extensions to the engine box seats are held by two arms that swivel out..I think it's probably fine for the average person, but not sure how bi...

Mizerita

Here are a few more pictures and a link to a quick video. The sea trial wasn't much of a trial as it was dead calm (but cold)...in the video this is 4100 rpm at around 22-23 knots. I will have to say the Mercs are quiet. As you can see in the second picture, the guy who built the boat loved bench se...

Mizerita

I've got a few videos during sea trail that I'll try to post. Trying to figure out how to post videos...photobucket doesn't allow.

Mizerita

Thanks guys, I'm super excited. To answer your question, yes, the boat is immaculate. I sea trialed the new 35 and was very close to pulling the trigger, but for 1/4 of the price thought I could "get close" with Double Bogie. I looked at and sea trialed a number of 31s including the two in the Palm ...

Mizerita

Hey guys, my name is Steve (Mizerita) and I just bought the boat at at least one of you called the “Howdy” 31 Bertram named Double Bogie (pictures/links below). I know, I know…he paid what? It took a few months of negotiating, but in the end, once I repower she'll be the closest fit and finish to th...

Mizerita

Thanks for the input Pete. I'll give both a call and will follow up with the group.

Mizerita

If you have a way to contact him, have him ping me. Thanks guys.

Mizerita

I saw those posted. Been lurking around the forum for a while, but thought I would go ahead and jump in. Looking forward to hearing from a few of you. If anyone knows any sedan owners, send them my way.

Mizerita

Calling all Bertram 31 owners...looking for a 31 Sedan model. Currently in Key West, FL and would consider a project or boat that is already finished. If anyone knows of any sedan owners that would be willing to sell, please let me know. Doesn't seem to be too many out there so hoping this group can...

Search found 50 matches