bertram31.com

Bill G.

Txs Charlie much appreciated it's only for the dock no Gene, but no time unfortunantely and not to good at cut holes in the boat but it did cross my mind.

Bill G.

Txs Tony it is for the boat and I tried D and S but I was to late for install he only does them before Memorial day and after Labor day.I 'll give them a call.

Bill G.

Sorry meant D and R

Bill G.

Would anyone have a recommendation for an install of a/c in the Ocean County NJ area?.Tried D and R but can't help me till after Labor Day......TXS,
Bill G.

Bill G.

Anyone bought a carb threw National Carburetors?looking to buy a rebuilt Quadrajet prices seem good. TXS................Bill G.

Bill G.

Anyone tried Tuf oil in their gas or diesels?have a friend who swears by it.

Bill G.

Ever seen a pink 31?,ck out inletpics.com Oct.1 Grand Slam photos 101-200..... Happy and Healthy too all. Bill G./Quota II

Bill G.

Can someone tell how involved it is to get my leaking fresh water tank out of my 28.It looks like one metal strap but I'm guessing it might be fiberglassed to the board it sits on. Many thanks- Bill G./Quota II

Bill G.

Duct tape it is,pulled it and sent it for repair Thanks!

Bill G.

Probably will rip it out I did use some stuff called J-B Weld a liquid cold weld and I seem to remember it worked anyone else ever used it?sold at Home Depot.

Bill G.

Have a leak on one of the top necks[at the weld] of my mercruiser heat exchanger anybody tried Marine Tex for the repair or any other epoxy or am I fooling myself and rip it out and send it out?..TXS-Bill G.

Bill G.

Hey Harry good call it is the damper plate and a broken spring TXS for the help...........Bill G.

Bill G.

Thanks Scot the noise is while in gear

Bill G.

Harry thanks ,I change the fluid every year it's clean no metal that I could see.

Bill G.

Didn't try that but the noise is not a rattle more of a bad bearing noise

Bill G.

only in gear

Bill G.

I'm hoping you guys can steer me in the right direction developed a new noise in the trans it sounds like when a bearing goes bad I thought it might be a cutlass bearing but it's in the trans.Before I have it yanked anything I can do or check.Shift in and out of gear no problem running no problem.As...

Bill G.

Thanks Vic I was concerned about protecting the paint against the elements, sun and salt hoping to keep the color and shine for aleast alittle while.

Bill G.

Has anybody tried Rejex on Imron?any suggestions on something better to use Imron..............................TXS, Bill G.

Bill G.

Anybody feel leaving the cabin or deck hatchs open under the shrink wrap makes a differance with mildew or moisture in the bilge?see alot of mildew on the fuel tank..............Happy New Year.............Bill G.

Bill G.

What do you guys think about wrapping from the rub rail up,by the way thanks for all the comeback.Trying not to have to buy a custom cover or use a tarp.Anybody tried to wrap just the bridge, cabin and cockpit?

Bill G.

Can I shrink wrap for winter after having my hull sprayed in Sept with Imron?someone at the marina thought you shouldn't for 1 season. txs.......Bill G

Bill G.

Any good match with Imron?

Bill G.

Capt. Patrick..............thanks again for your input any idea on a 73/74 28 hull what white would match up good,even thought about a pale yellow but leaning white. BR Bill G.

Bill G.

Thinking of having my hull sprayed with Imron,pros and cons?is it durable?can you get rub marks out?...................................TXS,Bill G.

Bill G.

no lower helm on this boat

Bill G.

http://newimages.yachtworld.com/2/0/9/3 ... 373_12.jpg
Is this a/c,heat?never seen a unit like this.......................TXS,-Bill G.

Bill G.

Kevin, thinking the same and gave a quick shot at it on sun. but I think you'll find the space between the 2 stringers and the floor will be different on each side will need a little crafting.Let me know if you come up with anything better.........................TXS-Bill

Bill G.

Hey Rawleigh, that is the only area that doesn't have any cross support at all there's about a 2 inch gap betwen the floor and stringers.

Bill G.

My 28's foward cabin floor has some flex just in back of the foward inspection hatch for the bilge pump.Looks like the only fix without ripping out alot of stuff is to maybe put a support beam between the stringers and floor any problems with using the stringers for support?,unless there's a way I m...

Bill G.

Please keep me in the loop as well for my 28...............TXS, Bill G.

Bill G.

What is the correct way to ground outriggers?..................txs-B.G.

Bill G.

Need to replace my charger,any better than others?any to stay away from?
txs, Bill G.

Bill G.

I have a set of 230 merc small blocks have allways set the timing a couple of degrees behind, 6 deg. vs 8 deg with the thought of no pinging and engine life.Do I have much to gain going to the manufacturers spec of 8 deg.? any pros or cons?. txs, Bill G.

Bill G.

I have a 28 with and ditto on the running the engines and ckg gauges,I had a shift cable snap last year[thought it would make it till the and of the season thought wrong]on the bridge controls so having the back up made it alot easier getting back to the dock. Bill G.

Bill G.

I'm sorry I know I've seen a post about this but West Marine CCP vs Interlux ACT?big price difference is the ACT worth it?as allways thank you.
Bill G.

Bill G.

Thanks for the input gentleman have a couple of areas that the gelcoat is wearing thin and was thinking of a bandaid till business gets better thinking it might help preserve whats there...................txs,........Bill

Bill G.

Anybody ever tried Poliglo?any good or snake oil?

Bill G.

Good Morning all,have some areas on the hull that look like had been redone and the best way to describe it is small scratchs or cracks and coarse if you rub your hand over the surface still glossy.Don't know what to think,is it gelcoat thinning to the last coat or hard and splinter cracking?Noticed...

Bill G.

Anyone have any strong opinions on wax brands, any better results as far as lasting the season.Saw someone using a 3M wax in a blk/purple bottle and it came out real good but hard to work with had to be applied with a wheel.Been using Nu-Finish only complaint it seems to hold dirt and streaks but a ...

Bill G.

Used gortex on my 28 last year so far so good just took time to get it adjusted to basically no drip and almost none while running with cool packing glands. Bill G.

Bill G.

Anyone know of an easy way to remove Sikkens from teak? txs.....Bill G

Bill G.

I second the motion on S and P

Bill G.

Forgot to mention it's on blocks

Bill G.

Forgot to mention it's on blocks

Bill G.

Anybody know of transom problems with 28's,rot?.Seem to have a area where the rear bilge pump sits that holds a pocket of water and seeps out looks like it does finally drain hoping it's just a pocket under shelf of the bilge pump.Don't know if that's an area that could have a rot issue with water l...

Bill G.

sorry forgot to mention to look at the outdoor photo section

Bill G.

Hey Guys,..........ck out UGLY on hull truth,just when you think you've got boat problems.

Bill G.

Hey guys where could I buy AZAK I'm in N.J.?

Bill G.

Mike, I replaced all last spring all the same.I was kinda thinking that I may have a ground issue on that motor?

Search found 125 matches