bertram31.com

Al C

Not all that familiar with the Yanmar engines but I do remember reading somewhere that there was a exhaust valve oil seal problem and a updated seal was put into service.
I most likely read it on the Boat diesel forum but I can't check because I'm no longer a member.

Al C

Jack
You can find out if your turbos are up to snuff pretty cheap with a boost gauge.

Check this link it may help you.

https://www.sbmar.com/articles/understa ... eshooting/

Al C

Could be an air leak somewhere and your losing boost. Check your hoses and clamps around the turbo and leading to the engine.

Al C

Not really familiar with your engines but had a similar problem with my cummins 6bta and turned out to be a turbo issue.

Al C

There is one was posted on THT I have no affiliation.

https://www.thehulltruth.com/fishing-mi ... chair.html

Al C

Tony

Boat is now in Staten Island changed the name to Miss Amy after Sandy.

Al

Al C

My boat was named Dragon lady IV also purchased in Waretown NJ Holiday Harbor Marina?????

Al C

Raybo

Thank you, keeping my fingers crossed.
Al

Al C

Carl Before Sandy we were warned by the yard guys to be careful and be sure to tarp the area when painting but I have never seen or heard of anyone being fined. On the DEC site they mention paint that with contains TBT you needed to be a licensed pesticide applicator but I don't believe that paint i...

Al C

My marine is actually in a Federal Park and there has been no issues. People paint their own or hire out without any interference from the feds but that could change tomorrow.

Yannis
I have seen the pictures you post and I dream of boating in a place that beautiful someday.

Al C

Tony They used Seahawk tuff stuff barrier coat and according to the web site you have 24hrs to apply the bottom paint if not you need to sand or apply another coat of barrier. As far as speaking Tom Oakes goes he has been doing a fine job of stringing me along since December. It went from "we will m...

Al C

Navatech It got the works, boat was at HOLTZ For repair after Sandy. It had floated away with the dock with the surge. It came to rest in a nearby marsh and the bottom was blasted so they could inspect it for damage. What concerns me is they might not have applied the bottom paint soon enough after ...

Al C

Yannis
Thank You. Boats here can see 2-3 years with only minor touch up if a quality paint is applied properly. My boat is in a slip 6 months a year no beach landings and definitely not normal for it to look like this.

Al C

Actually it looked better

Al C

This would be the before picture

Al C

I got a bottom job at Holtz before last season and when the boat was pulled this is what it looks like. Holtz has been stringing me along since December so with the season approaching it now looks like its up to me to fix this mess. I'm not sure if I can just sand and paint or will I need to remove ...

Al C

31 Bertram Specialties - Alex Whitaker he is on the west coast so shipping will be expensive.

http://www.31bertram.com/fiberglass-fuel-tanks.html

Al C

If your on Facebook there are some artist renditions of the new 35.

Al C

I don't think there is a completed boat yet. I could be wrong but that my impression.

Al C

There was some positive reviews on that stuff over at the Hulltruth awhile back. It is expensive and I got the impression whatever you use it on needs to be in decent shape with no pitting. I think this is the company web page

http://www.clearkotesystems.com/marlin-tower/

Al C

John I haven't run the boat yet, the guys at holtz had it out for a short ride to check things out no electronics so I don't have any numbers. My boat has 250hp cummins engines and in the 31 from what I have seen and what others have posted they run pretty close to whatever rpm you chose to cruise a...

Al C

John Swick

That number isn't working for me.

Al

Al C

Thanks guys for the kind words. Bertramp Yes factory hardtop that was in rough shape the guys at Holtz had to do a lot of work on it. John I'll give you a call tomorrow don't know how much help I will be not an expert by any stretch, the person you should speak to is Tom Oakes at Holtz 772-485-4595....

Al C

Tom sent me another shot a little blurry but.

Al C

Mike
I'm like a kid on Christmas morning.
Al

Al C

She's finally back in the water after a 2 year rebuild at Holtz. All she needs now are electronics and outriggers then we can take her fishing again. Tom and the guys did a great job. https://im1.shutterfly.com/media/47a5d600b3127ccee9bfd5e70b9800000030O2wAbtXDhm3bs2bUHt58M/cC/f%3D0/ls%3D00533773885...

Al C

Check with Tom Oakes at Holtz 772-485-4595 he just put the oval exhaust on my boat.

Al C

I have a garmin b744 its yours for site donation if it helps you out. I'll cover the shipping.

Al

Al C

Carl
Don't know if anyone is still around I have not be down the yard much,think I'm on "D" dock now unless Eddie moved me.

Al

Al C

Yep thought I was getting her back in May so I paid for this years dock. Doesn't look like I will be getting much use out her this year.

Al C

Thanks for the kind words guys.
Tony I'm over in Staten Island at the same marina as Carl but if you can believe it we have never met.

Al C

Tony The guys at holtz are doing a great job the boat looks better than I ever imagined. I probably would never had been able to restore her to this extent if it was not for the storm and the insurance money that went with it. My main thing has always been fishing and my boats were never pretty just...

Al C

One more

Al C

After a LONG two year stay at Holtz my boat is nearing completion. Although Sandy didn't beat her to badly it was an older restoration that was begging to be done again. Would have posted more but Tom is being stingy with the pictures he sends. https://im1.shutterfly.com/media/47a5d906b3127ccee9e2d9...

Al C

Don't know what the material is but the color in Jimmy Gs video looks real nice.
https://www.youtube.com/watch?v=vXq-3iXTIHQ

Al C

My boat is being painted by Holtz so I did a little research and found this at the awlgrip site.

http://www.awlgrip.com/MPYACMDatasheets ... eng+A4.pdf

Al C

Bill A friend of mine was thinking of trying it but the tech specs changed his mind. Might be a none issue but it put some doubt in his mind. The following is from the Jamestown Distributors site: Not suitable for boats with extremely fast shaft rotation To determine if your shaft rotation exceeds t...

Al C

Had a black smoke issue with my cummins and after going through everything else it turned out to be the props. They looked fine to the naked eye, even the prop guy said they "looked good" but after closer inspection he found them to be out of specs and cured my smoke issue.

Al C

The Taco has two controls on the lower half one swings them out the other for elevation. Looks like you would need to go up top to change the elevation on the rupp.

Al C

Check out the Taco Grand Slam 380, they adjust completely from under the top no need to climb on the gunnels.

Al C

I am also interested, price please.

Al C

Really?

http://www.ebay.com/itm/Aluminum-Fire-A ... 1319wt_978" onclick="window.open(this.href);return false;

Al C

I am looking to get my dash done and found this site. Looks good but I have not ordered anything yet.

http://www.vikingpanels.com/marine_swit ... ction.html

Al C

Dug
My boat is there now having sandy damage repaired. His email was hacked and his new email is tomoakes@holtzboatworks.com.

Al

Al C

Good to hear, hope to have mine down to Holtz soon to have Sandy damage repaired and a few other things done.

Al C

Looks good all cleaned up

Al C

They work cheap! I don't even want to think about touching 'em for that!!! LOL!

Really, just imagine what they would go for on Ebay!! LOL

Al C

There is a SCOPINICH TC1 fighting chair for sale on the Hull truth for $1500. if anyone is interested, nice looking chair

http://www.thehulltruth.com/fishing-mis ... ippin.html

Al C

Carl Sorry to hear about your house if I can help give me a call not all that talented but if you need something let me know. My boat is back at the marina, they actually dragged it back into the water instead of trucking it. Bottom took a beating but still no holes. Spoke to Eddie today he said the...

Al C

Carl
Its in the park at Crescent Beach bottom of Glover Ave.
Al

Search found 88 matches