bertram31.com

this is some of the other work I've been doing providing samples to all these different researchers to bring about important awareness
it was a huge expense out of pocket west coast east coast transportation etc

Keith Poe

Keith Poe

https://youtu.be/fD3nA7T8bM0

Keith Poe

Hello John

That Mako was 11'

Here's a video of another one pulling like a freight train.

That's 10 over 9' in the last six trips going again in a few days.

Cheers

Keith Poe

http://www.nova.edu/ocean/ghri/tracking ... makosharks

Keith Poe

drop in the video at 22 minutes and start watching

MAKO MAYHEM: http://youtu.be/KVSBhiez9Tk

Keith Poe

Going to trailer it down to the launch ramp tonight after the wide load curfew slap the spurs on and let her breath.

Keith Poe

Got It Going after checking the injectors and everything lift pump etc. found it did not want to suck air lifted the valve covers and one was stuck after 164 days sitting.

Started instantly.

Thanks again for all the help guys.

Keith Poe

Thank You

Keith Poe

Sorry for all the post if I write more than a few lines on the phone it starts to scramble everything

Keith Poe

Burnt up a wiring harness

I repaired it to make it in

Other than that ran fine I'm assuming the salt screwed something else up so far everything I check has power function

Keith Poe

Rag I had stuffed in there came out and I didn't know it salted the motor

Keith Poe

Now the part I haven't told anyone yet big ass mako destroy the air vent

Keith Poe

Thanks for your help. What about the black smoke coming out the exhaust that would indicate the fuel is combusted but it seems it doesn't want to stay running possible electric

Keith Poe

The starboard motor fires right up runs like a top

Keith Poe

Hey Petes I've been dipping the tank and I've inspected it I don't see any algae

Keith Poe

4500# Still tracking her from 32 months ago

Tagged her in a 19' Davidson Albie

Also ran 5 Basking sharks last season in the 30' Class

https://vimeo.com/71425807#share

Keith Poe

https://youtu.be/ZMErtUaWgpc

BIG MAKO 100# of Drag

When I put her away months ago she was running great.

I put the starting fluid to her and she seems like she wants to run black smoke out the exhaust.

Thanks again for any help guys

Keith Poe

12' MAKO Hand Line: https://youtu.be/6-CM0jyNtTE

Keith Poe

I believe I know what the problem is hard to post with this phone I'll reply tomorrow

Keith Poe

I don't know if they do or not but it's above 60 degrees here and I leave the key on for several minutes before spriaying

Keith Poe

Thank you for the help.

Oil is good.

It gas a pump on it for priming.

Sharktagger777@Gmail.com

Keith Poe

Been sitting for months Primed it and seems to hold prim but cracking injectors on the running motor or the not running motor no fuel comes out. Filters and lines are full. Starting fluid third try kicked a little. Fuel pump ? Pressure gage where to connect ? Fuel return line any help crack it under...

Keith Poe

Hey Guys been super busy filming Discovery tagging researching Guy Harvey Foundation etc. Just Spot Tagged an Adult Mako for the Guy Harvey Foundation super stocked 8' seas at nigh with Captain Wane. http://www.nova.edu/ocean/ghri/ Check This Video Out Diablo Canyon Mako: http://youtu.be/TigMfGbWGfM...

Keith Poe

thanks guys learn something new every day.

Im heading out to put a spot tag on a breeder mako and im being permitted to spot tag great whites.

I believe the mako will be a first.

Keith Poe

[youtube]http://youtu.be/Nod551nieZ8[/youtube]

Keith Poe

Had a 400# Friday and a 400# 600# and 1000# Monday. Here's some of the action I have my hands full when it's Kodak time but have more shooting dates with shark week and NBC sports etc. to get the shot and found someone crazy enough to get in with them Wow right. They look so much better swimming the...

Keith Poe

Isinglass for traveling and weather

Keith Poe

Hello Guys Unfortunately I blew another impeller opposite motor that was just completely rebuilt last November. 40 miles at 6 knots Hydraulic steering ram I welded a few months ago started leaking to always something. Good news is im dialed in with the breeder makos and have about a month of filming...

Keith Poe

Thank you guys I have to go offshore for four days ill be back

Keith Poe

Check and see if there's power to the compressor correct

Keith Poe

6'-100#
7'-200#
8'300
9'400#
Every foot after that add 200#

Keith Poe

Preciate the help how do I check for a burned out compressor

Keith Poe

I connected the house water hose to it and tested it again. Compressor did not come on. https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10553630_919282871430656_4785269520591672644_n.jpg?oh=df338abfa187cd27138cadb010744d39&oe=5437E591&__gda__=1412991565_3cc9b3fdb529254d419d1f5a3d6937...

Keith Poe

http://www.powerandmotoryacht.com/node/ ... 9hL-1V0zIU

Keith Poe

http://www.powerandmotoryacht.com/refit ... ms-part-ii

Keith Poe

Thanks you guys much appreciated. I put a new capacitor in no luck on further observation looks like there is no fan and the unit is water cooled. The line out is connected but not the line in. Is this a wash down pump or ? Is there a pressure switch or will it turn on without water supplied till it...

Keith Poe

Knob controls not sure whose brand I check the capacitor if I did it right it's bad I'm going to pick up a new

Keith Poe

Hey guys I have helped rebuild the transmission on a 250 ton chiller but never fooled with them much. I plugged the system in to the shore power and seems functional fan etc. but the compressor is not turning on and suggestions how I should go about figuring this out with out reinventing the wheel ?...

Keith Poe

Where can I get one ?

Keith Poe

Hey Guys I am bringing the fish along side then cleating them off on the spring cleat then tail roping them at the stern cleat then attaching the tag to the dorsal. https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t34.0-12/10445935_910151929010417_3411834790076883210_n.jpg?oh=a03f16705e07fbc...

Keith Poe

Hello guys I put a Teleflex system on that was a wall hung now it's a deck mount and the oil fill does not seem to be allowing me to fill it properly. I get all the air out and no leaks then it starts to slip from air in the system after a short while. I pulled the decks checked every where no leaks.

Keith Poe

Well the props are pretty far below the hull so after looking around and seeing nothing that looks like what I need on line I started starring at the hull and the lowest Tec way and least expensive way I could figure out is simply bolting a aluminum plate the to rail and another just under the hull ...

Search found 490 matches