Clamps for stuffing box hose

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
Stuart Cooperrider
Senior Member
Posts: 83
Joined: Jun 29th, '06, 15:07
Location: Cape Cod

Clamps for stuffing box hose

Post by Stuart Cooperrider »

Hi.
I'm replacing the clamps and am checking to see if the T style hose clamps are sufficient. The heavily corroded clamps I removed looked to be left over from a previous century. Wide heavy iron bands secured with 1/2" bolts.
Thanks in advance for your recommendation.

p.s.
I haven't been on the site for a while and am finally putting the 31 in after a year on the hard while installing a new aluminum tank. Looking forward to
filling her up.
User avatar
Skipper Dick
Senior Member
Posts: 330
Joined: Jun 29th, '06, 08:22
Location: Cape Coral, Florida
Contact:

Post by Skipper Dick »

Stuart,

I've spent a ton of money replacing all of my exhaust hose clamps and dripless clamps on my B28, putting double clamps on each and every one. As far as I am concerned, the "T" bolt clamp is one of the best as long as you get them in a decent stainles alloy like 316 or even 303. Those hoses that I couldn't get "T" bolt for, I still doubled up. One can't imagine how many clamps that makes on twin engines and on all your hoses, but I've experienced some scary moments when I was a younger boat skipper that had some obscure clamp under the engine or on the outboard side give way and the bilge suddenly looks like a swimming pool.

"T" bolt clamps work for me

Dick
1983 Bertram 28 FBC w/300 Merc Horizon
User avatar
AndreF
Senior Member
Posts: 711
Joined: Jun 29th, '06, 09:53
Location: Baton Rouge, Louisiana
Contact:

Post by AndreF »

Check out these titanium clamps. I used them on my gen set exhaust.

http://www.ticotitanium.com/hinges.php
I'm not sure but indecision may or may not be my problem.

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

1981 FBC BERG1883M81E
User avatar
Skipper Dick
Senior Member
Posts: 330
Joined: Jun 29th, '06, 08:22
Location: Cape Coral, Florida
Contact:

Post by Skipper Dick »

Now that's a clamp. Titanium stopped bullets from hitting me in the ass on a Rescue Chopper, it can damn sure stop corrosian. I'd use these for very wet areas, but I'll bet they'd be pretty pricey to do a whole boat like I've done several times. But I've put that web site in my favorites. They look awsome.

Thanks Andre

Dick
1983 Bertram 28 FBC w/300 Merc Horizon
User avatar
AndreF
Senior Member
Posts: 711
Joined: Jun 29th, '06, 09:53
Location: Baton Rouge, Louisiana
Contact:

Post by AndreF »

Actually, this is where I got mine and it was at the FLL boat show.

http://titan-marine-hardware.com/titani ... clamps.htm
I'm not sure but indecision may or may not be my problem.

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

1981 FBC BERG1883M81E
User avatar
Rawleigh
Senior Member
Posts: 3433
Joined: Jun 29th, '06, 08:30
Location: Irvington, VA

Post by Rawleigh »

Tico has a Titanium Anchor too!! Neat!
Rawleigh
1966 FBC 31
User avatar
nic
Senior Member
Posts: 345
Joined: Sep 6th, '06, 00:43
Location: Sydney

Post by nic »

One of the clamps that come with the PSS seals rusted through in 15 months...all the others were OK, now all replaced but could not believe it...right at the ventilated part...rusted out. Checking them every six months from now on.

Nic
Hull No. 330 1963 SF "Tennessee"
mikepelham
Posts: 88
Joined: Aug 21st, '06, 09:41
Location: LBI, NJ
Contact:

Post by mikepelham »

Hey Nic,

I have #331 1963, pretty cool. She is al redone I will post some pics
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 11 guests