Capt. Pat, ref: side windows

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
ed c.
Senior Member
Posts: 303
Joined: Jun 29th, '06, 18:51
Location: wildwood crest, nj

Capt. Pat, ref: side windows

Post by ed c. »

My son is about to replace the window that stays in place. Both starboard & port have cracked, what is best solution for fixing this problem. We have not had a problem with either of the sliding windows. Thanks
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Re: Capt. Pat, ref: side windows

Post by CaptPatrick »

Ed,

Do you have tint film on the windows? That's a common cause of cracked safety glass. Safety glass has a plastic layer between two thin layers of un-tempered mineral glass and when film, (safety or tenting), is added one layer of glass is insulated and now has a different expansion/contraction rate than the other piece, possibly resulting in a crack...
Br,

Patrick

Molon labe
ed c.
Senior Member
Posts: 303
Joined: Jun 29th, '06, 18:51
Location: wildwood crest, nj

Re: Capt. Pat, ref: side windows

Post by ed c. »

Yes they are tinted. The crack we get is on the inside ,it goes from the stern to the bow for the entire length of window. I' ll tell my son what you said and go from there. Thanks a lot for the info.
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Re: Capt. Pat, ref: side windows

Post by CaptPatrick »

Ed,

Thought that might be the case... Order your replacements in tinted glass so that you don't have to add film.
Br,

Patrick

Molon labe
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], jrmoro and 55 guests