Chris craft dory re power

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
mpcrnc
Posts: 9
Joined: Dec 1st, '09, 13:07
Location: Arlington,Virginia

Chris craft dory re power

Post by mpcrnc »

I recently acquired a 1965 wooden CC dory. I am putting a new plywood/f/g bottom and new fuel tank on it and am considering a repower(currently an old Chrysler 318). I have seen other members on this board who have this boat. Any suggestions on re-power to a more modern engine? Mike
User avatar
In Memory Walter K
Senior Member
Posts: 2912
Joined: Jun 30th, '06, 21:25
Location: East Hampton LI, NY
Contact:

Post by In Memory Walter K »

How big is the dory and how do you intend to use it?
mpcrnc
Posts: 9
Joined: Dec 1st, '09, 13:07
Location: Arlington,Virginia

Post by mpcrnc »

CC dory is a 22 lapstrake boat with inboard power. It will be used in the Chesapeake Bay and in Southern New Jersey on the ocean.
User avatar
Charlie J
Senior Member
Posts: 2207
Joined: Jun 29th, '06, 09:14
Location: freeport n.y

Post by Charlie J »

are you talking about the 22 cutlass
mpcrnc
Posts: 9
Joined: Dec 1st, '09, 13:07
Location: Arlington,Virginia

Post by mpcrnc »

Yes. the 22 ft hull was made in 2 versions a center console called the dory and a small cabin version called the cutlass.
User avatar
Charlie
Senior Member
Posts: 357
Joined: Jun 29th, '06, 12:59

Post by Charlie »

My neighbor who is a diesel mechanic has one. He repower a couple of years and just went with another 318. He did install cdi ignition.
Another neighbor has a 22 cutlass with a 4.390tdi 200hp Nanni Diesel.
mpcrnc
Posts: 9
Joined: Dec 1st, '09, 13:07
Location: Arlington,Virginia

Post by mpcrnc »

I was wondering if anyone had used one of the Steyr diesels? Mike
User avatar
In Memory Walter K
Senior Member
Posts: 2912
Joined: Jun 30th, '06, 21:25
Location: East Hampton LI, NY
Contact:

Post by In Memory Walter K »

Would be nice, but not cheap (not that any of them are). Bill Smith (Tunawish?) on Shelter Island has a Cutlass he was talking on the site a while back about restoring. Maybe he'll chime in.
Raybo Marine NY
Senior Member
Posts: 895
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

if you have the coin for diesel that is great, if you want to stay chrysler I actually have a 413 that was never in a boat, I rebuilt it for my Century but honestly I cant see myself ever bothering with the boat.

it is tough to beat those chryslers
User avatar
algillen
Senior Member
Posts: 50
Joined: Nov 25th, '06, 20:18
Contact:

Post by algillen »

Hey Charlie,

How does your neighbor's boat perform with the 200 HP diesel? Years ago I had a 22' Cutlass with a 327 CI Chevy (about 225HP), and it performed really well, ran about 22 or 23 knots at something over 1.5 NMPG. I'd imagine that it has to a 2+ if not 3 MPG boat, and may well run in the 22-24 knot range.

I have been kicking around the idea of finding a fixer-upper dory and starting again. Was wondering if a diesel would work in that boat, or if the gearing would be a problem given the drivetrain (stock 1 1/8" shaft would have to go for sure). Think the 4cyl Yanmars would be ideal given the light weight and high RPM design, would lead to a gas motor-like drive train.

ag
Not everybody can own a Bertram 31
Email: algillen@yahoo.com
User avatar
Charlie
Senior Member
Posts: 357
Joined: Jun 29th, '06, 12:59

Post by Charlie »

From what I understand the guy loves the set-up. The nanni diesels are toyoto's; but without the special (high cost) yanmar stuff. I know another guy who put tow of them in a 31B and then ran the boat to Panama or Costa Rico, oh someplace in Central America on it's own bottom.
Face
Senior Member
Posts: 233
Joined: Nov 3rd, '06, 20:48

Post by Face »

How are you doing the glass over wood? Seaflex, epoxy? Where is the boat? I know a yard that has glassed countless wood dead-rises near Solomons, MD if you need assistance. Not sure if the boat is on the Chesapeake now...
B.W. Outrage 18
Restoring B28 w/ Cummins 4BT 150's
mpcrnc
Posts: 9
Joined: Dec 1st, '09, 13:07
Location: Arlington,Virginia

Post by mpcrnc »

The boat is at Mast and Mallet boats in Edgewater. The bottom is being done with epoxy/fiberglass. I will probably just keep the chrysler engine due to the cost of a diesel (18-20 K according to the local steyr dealer). Mike
Tunahead
Posts: 30
Joined: May 9th, '08, 19:53
Location: Shelter Island, NY
Contact:

Cutlass Dory

Post by Tunahead »

That model came from the factory with a 327, 210 hp motor. But if the 318 runs it well, they are great motors too. Just change the oil every fifty hours.
My CC Cutlass Dory is the rare 1978 Cuddy Cabin model. Great boat!
Tunahead
Posts: 30
Joined: May 9th, '08, 19:53
Location: Shelter Island, NY
Contact:

Re: Cutlass Dory

Post by Tunahead »

Tunahead wrote:That model came from the factory with a 327, 210 hp motor. But if the 318 runs it well, they are great motors too. Just change the oil every fifty hours.
My CC Cutlass Dory is the rare 1978 Cuddy Cabin model. Great boat!
Just bought a 78 Center Console model too with a 350 c in Crusader. Runs like a champ. Have it out not to do some cosmetics and also new mufflers. Great boats, both of them.
fred bortolan
Posts: 51
Joined: Jul 6th, '06, 16:29

Post by fred bortolan »

good luck with the dory
been looking for one since I sold my 31
did you find it local?
any more around?
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

Funny we have one in the shop powered with 6cyd. Ford Lehman. If you want I will take photo's .Sorry cannot talk to owner a gay feminist from Cherry grove Fire island.Victoria secret model no panties / no bra but a real bitch.
capt.bob lico
bero13010473
Tunahead
Posts: 30
Joined: May 9th, '08, 19:53
Location: Shelter Island, NY
Contact:

cutlass dory

Post by Tunahead »

fred bortolan wrote:good luck with the dory
been looking for one since I sold my 31
did you find it local?
any more around?
there is a project boat around. Interested?
fred bortolan
Posts: 51
Joined: Jul 6th, '06, 16:29

Post by fred bortolan »

Bob
send me a pic that would be great
I dont know about the sexual orientation
but not bad taste in boats :)
fjbdriver@aol.com
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 4 guests