bertram31.com

https://www.google.com/aclk?sa=L&ai=DCh ... xBw&adurl=
I took off part of the glue with those brushes

some one talk me here to clean it using a good degreaser and at the same time introducing an air compressor hose through the buffle openings inside the tank and let the bubles help to remove the dirt. if you tie a small stick to the hose will give you some play.
hope it helps......

Maybe he took it to rechrome?? Sorry!! Just joking. About two years a go I went to my boston whaler and I found installed a screen cover in the panel, the canvas guy asked in the harbor and went to my boat instead of my brother boston. lucky it was just a little thing.

I used a nylon brush wheel, what a pain in the??? "trasero?" I´m sure this glue would pass the quality control of the Roman empire, I still remember the smell............

Camper boat?? hillbilly distillery at least

I remember to see at the time of my new rub rail installation a gap without fiberglass in each side of the boat hull deck joint, in the closet behind the electric panel and in the port side closet too.
plug the hose there,
good luck!!

Definitely not in my opinion but in combination with a white swim platform........
who knows

"HEAVEN IS WHERE THE POLICE ARE BRITISH,THE CHEFS ARE FRENCH, THE MECHANICS ARE GERMAN, THE LOVERS ARE ITALIAN AND IT'S ALL ORGANISED BY THE SWISS.

HELL IS WHERE THE CHEFS ARE BRITISH, THE MECHANICS ARE FRENCH, THE LOVERS ARE SWISS, THE POLICE ARE GERMAN AND IT'S ALL ORGANISED BY THE ITALIANS.

It came in the back of the local news paper today.
the guys name is Jose Manuel Hermo, a retired mechanic, you can watch it on youtube.
I use go surfing up there, heavy winters.

Alien vs predator?

I truly believe I will not survive inside there with my detroits 4-53

I see in one of the pictures a tender with an outboard in the back of the boat.
Thats really funny!!

Ofcourse I will, but first I have to finish it. And once I finish it I will never, never, never do it again in my life, I guess but The truth it's that I have a vintage bmw in my home garage waiting for my money, I hope to learn the lesson one day. Ok once I finish her I will load the pics and the i...

Unfortunately it's the only thing I remember to throw it in the rubbish at the time we dismantle the boat. I just wanted to know what the damn thing was before the electic guy came to the boat. As I have to do some shoping, I will order this delco part. I couldn't do it myshelf without this site, yo...

[img]HTTP://i1239.photobucket.com/albums/ff505/DRUCK00/battery002.jpg?t=1300582091 I've got this pic fron the site so it's not my boat but I have the same there. the other two solenoids are connected toguether in a box just behind the old electric panel. My boat it's a 1975 flybridge cruiser detroit...

Hello, do you guys know the part number of the cole hersee big solenoid betwin the battery connectors? I run diesel engine and also the two for the parallel battery toggle switch (two solenoid in a small metal box). I am not an expert I am just restoring my fathers boat so the cole hersee catalog lo...

CHECK OUT "HIGHTIDE MARINE" now they sale fiberglass window frames under Bertram 31 parts.

I've been thinking about and I remember to see at least three B31 in Portofino, if you ever take her there.

The med weather it's the best for that boat.

American marine, pompano beach, Florida.
You do not need to send your old ones, what I did was order a oversize ones and now I will use the old ones as a pattern to cut the new ones.

Bob, I did once and they talk me that it can not be air shipped just ground, becouse of the components.

THANKS.

I restore it by: sand blast, weld, wash acid and awlgrip paint, now it's time to get it back in place. I am thinking on using dolfinite between the three frames (at the joints) and sikaflex with primer on the top and below the frames, to bed it in place, plus the screws. I have only a can of dolfini...

dug,

I have to say "thank you very much indeed".

ME TOO. OVERSEAS. SPAIN . EUROPE. ........................

Does anyone know the cost of the flex mold to rebuilt the engine box?.
The dealer in Europe ask 240 Euros (370$) for a square meter (4ft).
Anyone try this?

Thanks in advance.

Hi, I live in SPAIN (EUROPE) so if you are agree I'll mail the $$$ to you.
Let me know your address.
Thanks.

Oh perfect, thank you very much indeed.

I removed the plywood and foam core from my engine covers (1975 fbc).
I am going to use klegecell as a new foam core.
In terms of engine heat should I use polyester resin or can I go with epoxy?.
Thanks.

Hi, I took apart the front window frames to weld and paint, now I have to dismantle the three sections that were together 32 years (5200).
How to do it? and thinking about lasting, paint or powder coat?

Thanks in advance.